Untitled - Flannery Plant Hire

OPERATOR'S STATIONCOOLING OPERATION(Although cool air will flow out of the front/defroster vent, front/rear/defroster vent, orfront/rear/foot/de-froster vent, normally the front ventor front/rear/defroster vent is used for cooling operation.)After selecting either the front/defroster vent mode orthe front/rear/defroster vent mode by operating modeswitch (10), set the desired temperature using temperaturecontrol switch (9).If AUTO switch (11) is pressed and air conditioner switch(12) is ON, cool air will blow out from front/defroster vent orfront/rear/defroster vent.The blower speed can be adjusted manually using blowerswitch (7).In addition, if the outer surface of the lower front windowbecomes clouded, close defroster vent (3). (The louver onthe defroster vent can be closed by hand.)73891210 11M178-01-017MCBB-01-0037891011DEFROSTER OPERATIONSelect either the front/defroster vent mode or thefront/rear/defroster vent mode by operating modeswitch (10). Set the maximum heating temperature (32.0%C or 91 %F) using temperature control switch (9). Pressfresh air mode switch (13) to turn the indicator ON.If AUTO switch (11) is pressed, air will blow out fromfront/defroster vent or front/rear/defroster vents.Adjust the louvers on front vent (1) and defroster vent (3)as required.The blower speed can be adjusted manually using blowerswitch (7).Turn on air conditioner switch (12) (indicator will light) if thewindows become clouded or if dehumidifying is required.13 123M178-01-017MCBB-01-0031-37