Untitled - Flannery Plant Hire

MAINTENANCEMetal Face Seal FittingsFittings are used on smaller hoses and consist of ametal flare and a metal flare seat.7 9 8 10 51. Inspect flare (10) and flare seat (9). They must befree of dirt or obvious defects.IMPORTANT: Defects in the tube flare cannot be repaired.Overtightening a defective flarefitting will not stop a leak.Shuttle ValveM202-07-0512. Tighten fitting (7) by hand.3. Tighten fitting (7) or nut (8) to the torque valuesshown. Do not allow hose (5) to twist when tighteningfittings.Control ValveWidth across flats17 19 22 27(mm)N!m 24.5 29.5 39 78Fastening(kgf!m) (2.5) (3) (4) (8.0)torque(lbf!ft) (18) (21.5) (29) (58)Pilot Piping Fittings (For shuttle valve)Width across flats (mm) 19N!m 34.3Fastening torque(kgf!m) (3.5)(lbf!ft) (25.3)T178-04-04-0037-55