Untitled - Flannery Plant Hire

PERIODIC REPLACEMENT OF PARTSMAINTENANCETo ensure safe operation, be sure to conduct periodic inspectionof the machine. In addition, the parts listed below,if defective, may pose serious safety/fire hazards. It is verydifficult to gauge the extent of deterioration, fatigue, orweakening of the parts listed below simply by visual inspectionalone. For this reason, replace these parts at theintervals shown in the table below. However, if any of theseparts are found to be defective, replace before starting operation,regardless of the interval.Also, when replacing hoses, check the clamps for deformation,cracks, or other deterioration, and replace as necessary.Be sure to perform periodic inspection of all hoses, asshown below, and replace or retighten any defective partsfound, as necessary.Consult your authorized dealer for correct replacement.Periodic Replacement PartsReplacementIntervalsFuel hose (Fuel tank to filter)Every 2 yearsEngineFuel hose (Fuel tank to injection pump) Every 2 yearsOil filter hose (Engine to oil filter) Every 2 yearsHeater hose (Heater to engine) Every 2 yearsBrake valve seals (Rubber parts) Every 2 yearsUpper-Brake hoseEvery 2 yearsstructureBrakesStop light switchEvery 2 yearsUnder- Center joint seals (Rubber parts) Every 2 yearscarriage Brake hose Every 1 yearsSteering hoseEvery 2 yearsSteering Mechanism Steering cylinder seals (Rubber parts) Every 2 yearsSteering valve seals (Rubber parts) Every 2 yearsPump suction hoseEvery 2 yearsBase Machine Pump delivery hoseEvery 2 yearsSwing hoseEvery 2 yearsHydraulicBoom cylinder line hoseEvery 2 yearsSystemFront Arm cylinder line hoseEvery 2 yearsAttachment Bucket cylinder line hoseEvery 2 yearsPilot hoseEvery 2 yearsNOTE: Be sure to replace seals, such as O-rings andgaskets, when replacing hoses.7-8