12.07.2015 Views

CCTNS RFP FOR SI VOL III.pdf - National Crime Records Bureau

CCTNS RFP FOR SI VOL III.pdf - National Crime Records Bureau

CCTNS RFP FOR SI VOL III.pdf - National Crime Records Bureau

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Crime</strong> & Criminals Tracking Network and Systems ProjectSikkim PoliceSpecification-cum-Compliance Sheet for Furniture requiredSlNo Specification Complied (Y/N)Computer Table ( Size: L 910 x W 610 x H 728 mm)Top: Size 910 x 610 mm made of 18 mm thick prelaminated medium density fiber (MDF) board I<strong>SI</strong>1 Marked (IS: 14587-1998). The top shall be firmlyscrewed on 25x25x1 mm square tube frame asshown in figure.Upper side of laminated board shall be in natural2 teak shade while the bottom side shall bewhite/cream shade.345Sliding key Board tray: A Sliding key Board tray shallbe made of 18mm pre laminated mediumdensity fiber board of size 725x450 mm. Thegap between top and tray shall be 100mm. Keyboard tray shall slide smoothly on sliding channelduly powder coated having nylon roller arrangement.The storage shelve for CVT : A storage shelvemade of 18 mm particle board shall be providedalong with the length of the table at bottomabout 100 mm above from the ground level.Shelves shall be screwed on frame work of25x25x1 mm square tube. The shelve shall becovered from back side with 18mm prelaminated medium density fiber board asshown in drawing.Steel Structure: The rigid steel structure shallconsist of two nos. rectangular base tubes ofsize 50x25x1.25 mm about 520 mm lengthplaced along the width on vertical tubes of size25x25x1 mm shall be welded for fixing up ofside panels. A supporting frame of 25x25x1mm square tube shall be welded on the top ofthe tubes for the side panels as shown forsupporting the top of the table.6 The base tube shall be provided with adjustableshoes 2 nos. on each side.7 Painting: Complete frame of tubes shall bepowder coated.Printer Table (Size: L 610 x W 610 x H 660 mm )Value Add (Ifany)/ Remarks123Shelves : 3 no. made of 18mm thick prelaminated Medium Density Fiber Board(MDF)I<strong>SI</strong> marked (IS 14587 – 1998)Top shelve size 610x610 mm for placingprinting unit.Middle Shelve size 460x330 mm for placingfeet on stationary.Volume <strong>III</strong> Request for Proposal for Selection of System Integrator Page 130 of 132

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!