36e Operator's Manual 2013.pdf - Marlow-Hunter, LLC

Hunter e36 • Sails and RiggingHUNTER e36 CONVENTIONALSTANDING RIGGINGITEM QTY WIRE SIZEFITTINGSCP-CP OR CP-EOS1 D3 2 9/32" 7 mm T-TERMINAL 308-325 14 ft. 6 1/2" 4430 mmFORK 308-315-012 V2 2 9/32" 7 mm EYE 308-363 14 ft. 6 1/4" 4425 mmEYE 308-3633 D2 2 3/16" 5 mm STEMBALL 308-552 14 ft. 1/2" 4280 mmCUP 306-572CUP 306-573STD/FORK TB 174-323-054 RD2 2 3/16" 5 mm FORK 308-313-01 13 ft. 10 1/4" 4225 mmSTD/T TB 174-473-215 V1 2 5/16" 8 mm FORK 308-316-01 15 ft. 9 1/2" 4810 mmSTD/TGLE TB 174-325-106 D1 2 5/16" 8 mm STEMBALL 308-555 15 ft 9 3/4" 4820 mmSTD/TGLE TB 174-325-107 RD1 2 3/16" 5 mm FORK 308-313-01 12 ft. 1" 3685 mmSTD/T TB 174-473-218 FORESTAY 1 9/32" 7 mm HOOD UNIT 45 ft. 8 3/4" 13937 mmOVERALL CP-CPSELDEN MAST SRIG-01091. CP = CENTER PIN; EOS = END OF STUD2. LENGTHS DO NOT INCLUDE SPREADER TIP LINKAGE.3. MEASURE T-TERMINALS & STEMBALLS FROM TOP OF FITTING12.13