Artis zee/zeego VC14 - Siemens Healthcare

sArtis zee/zeego VC14DICOM Conformance Statement4.2.5 Query/Retrieve SCP Specification4.2.5.1 SOP ClassesFor SOP Classes supported, please refer to “Table 1 - Network Services” section„Query/Retrieve“ in the “Conformance Statement Overview”.4.2.5.2 Association Policies4.2.5.2.1 GeneralWhen "trusted host" functionality is enabled Artis zee/zeego will only accept Associations fromknown hosts with a known AET. Hosts and AETs have to be entered in "Local Service" by aSiemens CSE.The default PDU size used will be 32KB.4.2.5.2.2 Number of AssociationsThe Siemens Artis zee/zeego DICOM application is able to accept multiple associations at a time.It can handle up to 10 associations in parallel.The number of simultaneous DICOM associations can be configured via the Service-UI. Thedialog can be found in "Configuration / DICOM / General".4.2.5.2.3 Asynchronous NatureThe Artis zee/zeego DICOM software does not support asynchronous communication (multipleoutstanding transactions over a single association).4.2.5.2.4 Implementation Identifying InformationFor Implementation Identifying Information please refer to “Table 3 - Implementation IdentifyingInformation”.4.2.5.3 Association Initiation PolicySee previous section “Query/Retrieve SCU AE Specification”.© Siemens AG, Healthcare Sector 2009 Rev. 08 Page 30 of 105