Artis zee/zeego VC14 - Siemens Healthcare

sArtis zee/zeego VC14DICOM Conformance Statement4.2.8.3.1.2 Proposed Presentation ContextThe Artis zee/zeego DICOM application will propose Presentation Contexts as shown in thefollowing table:Table 45 - Presentation Context “Patient Registered”Presentation Context Table – “Update Flag Information”Abstract SyntaxTransfer SyntaxDescription Name List UID ListRoleExt.Neg.1.2.840.10008.3.1.2.3.3Modality Performed Procedure StepExplicit VR Little EndianExplicit VR Big EndianImplicit VR Little Endian1.2.840.10008.1.2.11.2.840.10008.1.2.21.2.840.10008.1.2SCUNone4.2.8.3.1.3 SOP Specific Conformance• Attributes for the Performed procedure Step N-CREATEThe Siemens Artis zee/zeego DICOM Modality Performed Procedure Step SCU informs theremote SCP when the examination of a scheduled procedure step will be performed (i.e. thepatient is registered). The N-CREATE message is sent when the examination is started withsuccessful registration of the patient data. The following table describes the supported attributesof a N-CREATE message.Table 46 - Performed Procedure Step N-CREATE AttributesAttribute Name Tag Type ValueSOP CommonSpecific Character Set (0008,0005) 1C from MWL or createdPerformed Procedure Step RelationshipScheduled Step Attribute Sequence (0040,0270) 1>Study Instance UID (0020,000D) 1 from MWL or created>Referenced Study Sequence (0008,1110) 2 from MWL or >>Referenced SOP Class UID (0008,1150) 1C>>Referenced SOP Instance UID (0008,1155) 1C>Accession Number (0008,0050) 2 from MWL or user input>Placer Order Number/Imaging Service Request (0040,2016) 3 from MWL or >Filler Order Number/Imaging Service Request (0040,2017) 3 from MWL or >Requested Procedure ID (0040,0001) 2 from MWL or user input>Requested Procedure Description (0032,1060) 2 from MWL or >Scheduled Procedure Step ID (0040,0009) 2 from MWL or >Scheduled Procedure Step Description (0040,0007) 2 from MWL or >Scheduled Protocol Code Sequence (0040,0008) 2 from MWL or >>Code Value (0008,0100) 1C>>Coding Scheme Designator (0008,0102) 1C>>Coding Scheme Version (0008,0103) 3>>Code Meaning (0008,0104) 3Patient’s Name (0010,0010) 2 from MWL or user inputPatient ID (0010,0020) 2 from MWL or user inputPatient’s Birth Date (0010,0030) 2 from MWL or user inputPatient’s Sex (0010,0040) 2 from MWL or user inputReferenced Patient Sequence (0008,1120) 2 from MWL or >Referenced SOP Class UID (0008,1150) 1C>Referenced SOP Instance UID (0008,1155) 1CPerformed Procedure Step Information© Siemens AG, Healthcare Sector 2009 Rev. 08 Page 53 of 105