Artis zee/zeego VC14 - Siemens Healthcare

More documents

Recommendations

Info

sArtis zee/zeego VC14DICOM Conformance StatementService Status Meaning Error Codes Related FieldsWarningSub-operations Complete - One or more Failures ofWarningsB000Success Sub-operations Complete - No Failures or Warning 0000Pending Sub-operations are continuing FF00(0000,1020)(0000,1021)(0000,1022)(0000,1023)(0000,1020)(0000,1021)(0000,1022)(0000,1023)(0000,1020)(0000,1021)(0000,1022)(0000,1023)© Siemens AG, Healthcare Sector 2009 Rev. 08 Page 36 of 105
sArtis zee/zeego VC14DICOM Conformance Statement4.2.6 Print SCU Specification4.2.6.1 SOP ClassesFor SOP Classes supported, please refer to “Table 1 - Network Services” section “PrintManagement” in the “Conformance Statement Overview”.4.2.6.2 Association Policies4.2.6.2.1 GeneralWhenever a film-sheet is completely set up and printed by command or automated rule, the job isprepared for processing. As soon as the queue is ready to process the job, it is activated andworked according to the processing data. The Print application will initiate an association to theprint destination and process the printing.The default PDU size used will be 32KB.4.2.6.2.2 Number of AssociationsThe Artis zee/zeego DICOM application initiates one association at a time for each different printdevice configured.4.2.6.2.3 Asynchronous NatureThe Artis zee/zeego DICOM print application does not support asynchronous communication(multiple outstanding transactions over a single association).4.2.6.2.4 Implementation Identifying InformationFor Implementation Identifying Information please refer to “Table 3 - Implementation IdentifyingInformation” in the “Conformance Statement Overview”.4.2.6.3 Association Initiation PolicyTriggered by the Print job queue the Print Management SCU establishes an association by usingthe DICOM association services. An N-GET request determines the printer status prior to printing.If the printer status is “normal”, the print job is started.After the last film is printed from queue, the Print application will leave open the association foranother 60 seconds. If a new film job is ready for printing within this time-limit, the job will beimmediately processed over the still open association. If there is no new job, the association isclosed.During the “idle-time” (no open association to printer) the Print application will issue a cycliccamera status request (using N-GET of the Printer SOP Class) every 5 minutes.4.2.6.3.1 Activity - Print Film4.2.6.3.1.1 Description and Sequencing of ActivityThe film sheet is internally processed, converted to a Standard/1-1 page and then the pageimage is sent. Status is controlled by awaiting any N-EVENT message through the transfer untilthe last image or film-sheet is sent.If the response from the remote application contains a status other than Success or Warning theassociation is aborted.© Siemens AG, Healthcare Sector 2009 Rev. 08 Page 37 of 105
Page 1 and 2: sArtis zee/zeego VC14XXXXXXXXXXXXxx
Page 3 and 4: sArtis zee/zeego VC14DICOM Conforma
Page 35: sArtis zee/zeego VC14DICOM Conforma
Page 61 and 62: sResponse from Remote Node forStora
Page 87 and 88:
sArtis zee/zeego VC14DICOM Conforma
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105:
show all

Artis zee/zeego VC14 - Siemens Healthcare

Create successful ePaper yourself

Delete template?

Save as template?