Artis zee/zeego VC14 - Siemens Healthcare

sArtis zee/zeego VC14DICOM Conformance StatementType of Scene/ImageTable 69 - Image Type ExtensionsImage TypeSingle Plane Scene ORIGINAL\PRIMARY\SINGLE PLANE\SINGLE A (or B)Biplane Scene ORIGINAL\PRIMARY\BIPLANE A (or B)Reference ImageReference Image from CTReference Image from MRDynamic Reference Image(Dynamap)Store MonitorDERIVED\SECONDARY\SINGLE PLANE\SINGLE A(B)\REFIMAGEDERIVED\SECONDARY\SINGLE PLANE\SINGLE A\REFIMAGE\CT REFDERIVED\SECONDARY\SINGLE PLANE\SINGLE A\REFIMAGE\MR REFDERIVED\SECONDARY\SINGLE PLANE\SINGLE A(B)\DYNAMAPDERIVED\SECONDARY\SINGLE PLANE\SINGLE A(B)\STORE MONITORPerivision - Mask Phase ORIGINAL\PRIMARY\SINGLE PLANE\PLANE A\PERI\MASK\n 1Perivision - Fill Phase ORIGINAL\PRIMARY\SINGLE PLANE\PLANE A\PERI\FILL\n 1Dynavision - Mask PhaseDynavision - Fill PhaseORIGINAL\PRIMARY\SINGLE PLANE\PLANE A\DYNA\MASKORIGINAL\PRIMARY\SINGLE PLANE\PLANE A\DYNA\FILLDynavision - Injection Phase ORIGINAL\PRIMARY\SINGLE PLANE\PLANE A\DYNA\INJECTIONDynavision - WashoutPhaseORIGINAL\PRIMARY\SINGLE PLANE\PLANE A\DYNA\WASHOUT3D Acquisition DR ORIGINAL\PRIMARY\SINGLE PLANE\SINGL A(B)\3D ACQ\DR 23D Acquisition DSA ORIGINAL\PRIMARY\SINGLE PLANE\SINGL A(B)\3D ACQ\DSA 23D Acquisition CARD ORIGINAL\PRIMARY\SINGLE PLANE\SINGL A(B)\3D ACQ\CARD 2Store Fluoro LoopStore Biplane Fluoro LoopQuant Result ImageExam Protocol (Non-ImageObject)DERIVED\PRIMARY\SINGLE PLANE\SINGLE A(or B)\STORE FLUORODERIVED\PRIMARY\BIPLANE A(or B)\\STORE FLUORODERIVED\SECONDARY\\QUANTORIGINAL\PRIMARY\SINGLE PLANE\\EXAM PROTOCOL1 the term "n" is replaced by the related Step Number where the Image was acquired. StepNumbers start with "1".2 Additional values with phase info are set8.5.2 Standard Extended for other created SOP ClassAny SOP Instances created by Artis zee/zeego can be standard-extended by adding the followingsyngo private module attributes.Table 70 - Private Modules for other created SOP ClassIE Module Reference Usage NoteImageprivate syngoMEDCOM Header 8.5.2.3 Uinformationif object graphicsMEDCOM OOG 8.5.2.4 U is attached toimageU = User Option8.5.2.1 MEDCOM HeaderThe table in this section contains private IOD Attributes that describe the MEDCOM Header:Table 71 - MEDCOM Header AttributesAttribute Name Tag Owner Type NotesMedCom Header TypeMedCom Header Version(0029,xx08)(0029,xx09)SIEMENS MEDCOMHEADERSIEMENS MEDCOMHEADER1C2CMedCom Header identificationcharacteristics.Defined Terms:MEDCOM 1(Required if MedCom Header Info(0029,xx10) present.)Version of MedCom Header Info(0029,xx10) format.(Required if MEDCOM Header Info(0029,xx10) present.)© Siemens AG, Healthcare Sector 2009 Rev. 08 Page 87 of 105