Artis zee/zeego VC14 - Siemens Healthcare

sArtis zee/zeego VC14DICOM Conformance StatementAfter each broad-query, all Requested Procedures / Scheduled Procedure Steps that werecanceled or rescheduled to another modality at the RIS will be automatically removed from theScheduler DB if :1. the Examination of this procedure has not been started or finished yet, and2. the corresponding configuration item “Automatic removal of canceled/rescheduled Request”was checked in the Service UI under DICOM/HIS-RIS Node.No automatic clean-up of the Scheduler DB is performed after a Patient-based Query since theworklist received - due to restricted search criteria - does not correspond to the list of all currentlyscheduled procedures for the modality.4.2.7.3.1.2 Proposed Presentation ContextThe Artis zee/zeego DICOM application will propose Presentation Contexts as shown in thefollowing table:Table 40 - Presentation Context “Update Worklist”Presentation Context Table – “Update Flag Information”Abstract SyntaxTransfer SyntaxDescription Name List UID ListRoleExt.Neg.1.2.840.10008.5.1.4.31Modality Worklist Information Model - FINDExplicit VR Little EndianExplicit VR Big EndianImplicit VR Little Endian1.2.840.10008.1.2.11.2.840.10008.1.2.21.2.840.10008.1.2SCUNone4.2.7.3.1.3 SOP Specific Conformance• Search Key Attributes for the Worklist C-FINDThe Artis zee/zeego DICOM worklist SCU supports “broad worklist queries” with all requiredsearch keys. The following table describes the “broad query” search keys that the SCU supports.Table 41 - Supported Broad Worklist Query Search Key AttributesAttribute NameTagMatchingKey TypeQuery ValueScheduled Procedure StepScheduled Procedure Step Sequence (0040,0100) R>Scheduled Station AE Title(It depends on user configuration (Options->Configuration->Patient Registration) if the "own AET" is provided or not. Use(0040,0001) R or the "HIS/RIS" tab card for configuration.)>Schedule Procedure Step Start Date(It depends on user configuration (Options->Configuration->- or(0040,0002) RPatient Registration) if the actual Date with a full time range orrange from UIan interactive input dialog for date/time specification is used.)>Schedule Procedure Step Start Time(It depends on user configuration (Options->Configuration->Patient Registration) if the actual Date with a full time range oran interactive input dialog for date/time specification is used.)>Modality(It depends on user configuration (Options->Configuration->Patient Registration) if the "own Modality" is provided or not.Use the "HIS/RIS" tab card for configuration.)R = Required(0040,0003) R(0008,0060) R00.00-235959.00 or range fromUI or • Return Key Attributes of the Worklist C-FIND© Siemens AG, Healthcare Sector 2009 Rev. 08 Page 46 of 105