Artis zee/zeego VC14 - Siemens Healthcare

sArtis zee/zeego VC14DICOM Conformance Statement• N-CREATE• N-ACTION• N-DELETEThe Basic Film Box SOP Class N-CREATE-RQ message uses the following attributes (the actualvalues for each attribute depend on DICOM printer configuration within the Artis zee/zeegoDICOM print management SCU):Table 28 - Basic Film Box N-CREATE attributesAttribute Name Tag Usage SCU Supported ValuesImage Display Format (2010,0010) M STANDARD\1,1Referenced Film Session Sequence (2010,0500) M n. a.> Referenced SOP Class UID (0008,1150) M 1.2.840.10008.5.1.1.1> Referenced SOP Instance UID (0008,1155) MFilm Orientation (2010,0040) M PORTRAITFilm Size ID (2010,0050) M8INX10IN, 10INX12IN,10INX14IN, 11INX14IN,,14INX14IN, 14INX17IN,24CMX24CM,24CMX30CMMagnification Type (2010,0060) MBILINEAR, CUBIC,NONE, REPLICATEMax Density (2010,0130) U > 0Min Density (2010,0120) U 50 > value > 0Illumination (2010,015E) U> 0Required if PresentationLUT is present.Reflective Ambient Light (2010,0160) U> 0Required if PresentationLUT is present.Referenced Presentation LUTSequence(2050,0500) UM = Mandatory, U = User OptionThe N-CREATE-RSP message from the Print SCP includes the Referenced Image BoxSequence with SOP Class/Instance UID pairs which will be kept internally and used for thesubsequent Basic Image Box SOP Class N-SET-RQ messages.When all Image Boxes (including parameters) for the film-sheet have been set, the DICOM printmanager will issue a N-ACTION-RQ message with the SOP Instance UID of the Basic Film Boxand the Action Type ID of 1.The affected SOP Instance UID received with N-CREATE-RSP message will be kept internallyand used for later requests (e.g. N-DELETE-RQ) on the Basic Film Box - see below:Attribute Name Tag Source of Information(0000,1000) Affected SOP Instance UID of N-CREATE-RSPRequested SOP Instance UID (0000,1001)on Basic Film BoxThe Basic Film Box SOP Class interprets the following status codes:Table 29 - Basic Film Box Status CodesService Status Meaning Error CodesUnable to create print job, print queue is fullC601FailureImage size is larger than images box sizeC603Film box does not contain image box (empty page) B603WarningRequested MinDensity or MaxDensity outside ofPrinter’s operating rangeB605Success Film accepted for printing 0000© Siemens AG, Healthcare Sector 2009 Rev. 08 Page 40 of 105