s<strong>Artis</strong> <strong>zee</strong>/<strong>zee</strong>go <strong>VC14</strong>DICOM Conformance StatementAttribute Name Tag Type ValuePerformed Procedure Step End Date (0040,0250) 1 createdPerformed Procedure Step End Time (0040,0251) 1 createdComments on the Performed Procedure Steps (0040,0280) 3 user inputImage Acquisition ResultsPerformed Protocol Code Sequence (0040,0260) 3from Scheduled Protocol CodeSequence>Code Value (0008,0100) 1C>Coding Scheme Designator (0008,0102) 1C>Coding Scheme Version (0008,0103) 3>Code Meaning (0008,0104) 3Performed Series Sequence (0040,0340) 1>Performing Physician’s Name (0008,1050) 2C from MWL or user input>Protocol Name (0018,1030) 1C from related SOP Instance>Operator’s Name (0008,1070) 2C user input>Series Instance UID (0020,000E) 1C from related SOP Instance>Series Description (0008,103E) 2C from related SOP Instance>Retrieve AE Title (0008,0054) 2C>Referenced Image Sequence (0008,1140) 2CSeries related SOPInstances as items>>Referenced SOP Class UID (0008,1150) 1C>>Referenced SOP Instance UID (0008,1155) 1C>Referenced Standalone SOP InstanceSequence(0040,0220) 2C Radiation DoseTotal Time of Fluoroscopy (0040,0300) 3Total Number of Exposures (0040,0301) 3Entrance Dose in mGy (0040,8302) 3accumulated over completeprocedure stepImage and Fluoroscopy Area Dose Product (0018,115E) 3accumulated over completeprocedure step (dGy*cm 2 )Exposure Dose Sequence (0040,030E) 3on item for each irradiation event(acquisition or fluoro)>Radiation Mode (0018,115A) 3 "PULSED">KVP (0018,0060) 3 peak KV used for this event (KV)>X-ray Tube Current in µA (0018,8151) 3 tube current used for this event>Exposure Time (0018,1150) 3 time of x-ray in ms for this event>Comments on Radiation Dose (0040,0310) 3additional acquisition specificinformation (Entrance Dose, DoseArea Product, X-Ray Filter, etc. ) astextComments on Radiation Dose (0040,0310) 3 user inputBilling and Material Management CodeFilm Consumption Sequence (0040,0321) 3>Number of Films (2100,0170) 3>Medium Type (2000,0030) 3>Film Size ID (2010,0050) 3• The Performed Procedure Step SCU interprets the following N-SET status codes:Service StatusFailureTable 49 - Status Codes "MPPS Update"MeaningError Codes(0000.0900)Processing Failure: Performed Procedure Step Objectmay no longer be updated.0110No such attribute 0105Invalid attribute value 0106No such SOP Instance 0112Invalid Object instance 0117No such SOP Class 0118© <strong>Siemens</strong> AG, <strong>Healthcare</strong> Sector 2009 Rev. 08 Page 56 of 105
s<strong>Artis</strong> <strong>zee</strong>/<strong>zee</strong>go <strong>VC14</strong>DICOM Conformance StatementClass Instance conflict 0119Missing attribute value 0121Resource limitation 0213Success MPPS Instance set 0000• Performed Procedure Step ID without MPPS optionHandling of Performed Procedure Step ID in case• MPPS is not configured or• Unscheduled caseThe attribute “Performed Procedure Step ID” (0040,0235) will be encoded based on"YYYYMMDDHHMMSS". This date and time is based on the time when the first image isacquired. The "Performed Procedure Step ID" stays the same for all acquired or derived imagesas long as the patient is re-registered. A re-registered patient with a new study or new serieswithin the existing study will get a newly assigned "Performed Procedure Step ID".4.2.8.4 Association Acceptance Policyn. a.© <strong>Siemens</strong> AG, <strong>Healthcare</strong> Sector 2009 Rev. 08 Page 57 of 105