Artis zee/zeego VC14 - Siemens Healthcare

sArtis zee/zeego VC14DICOM Conformance StatementIf Storage Commitment Service support is checkedn. a.If Query Service support is checkedThe related Storage Commitment configuration is either inthe Storage section of the same AET or different AET (incase the current AET is only Storage CommitmentProvider).provides DICOMQuery modelThe Query models supported by this AET can be selected.When possible, the STUDY ROOT model shouldpreferably be configuredIf Retrieve Service support is checkedn. a.Checking Retrieve support for an AET is the only neededconfiguration item. This will allow access to the “Import”feature in the Query result browser.If Modality Worklist Service support is checkedQuery Waiting timeThe time to wait for the C-FIND-RSP after sending the C-FIND-RQ (default 20 sec.)Max Query MatchNumberQuery IntervalAutomatic removal ofcanceled/rescheduledRequestsThe maximum number of entries accepted in one worklist(default is 200)The time between two C-FIND-RQ to the HospitalInformation system (default is 60 min, minimum is 3 min,maximum is 1440 min i.e. 24 hours)Checking this item will removed all unused entries from thescheduler list prior to inserting the worklist responses witheach query.4.4.2 ParametersSystem parameters can be changed in the Service UI under “Configuration / DICOM / General”item - second page.ParameterAccepting/Rejecting an AssociationRequestTable 52 - General parameter settings and timeoutsTime-out ValuesDefaultMin MaxValueComment[sec] [sec][sec]60 15 600Association Open Request 60 15 600Association Close Request 60 15 600Accepting a Message overNetworkWaiting for Data between TCP/IPPackets300 15 60060 15 600Wait for an Association Requestor wait for a Peer to shut downthe AssociationWait for a reply to anAssociation Accept RequestWait for a reply to anAssociation Release RequestWait for a Network Write to beacceptedWait for Data between TCP/IPpackets© Siemens AG, Healthcare Sector 2009 Rev. 08 Page 60 of 105