Artis zee/zeego VC14 - Siemens Healthcare

sArtis zee/zeego VC14DICOM Conformance StatementAttribute Name Tag Type Value>Film Size ID (2010,0050) 3 Billing Supplies and Devices Sequence (0040,0324) 3>Billing Item Sequence (0040,0296) 3 >Quantity Sequence (0040,0293) 3>>Quantity (0040,0294) 3 >>Measuring Units Sequence (0040,0295) 3 • The Performed Procedure Step SCU interprets the following N-CREATE status codes:Service StatusFailureTable 47 - Status Codes "Patient Registered"MeaningError Codes(0000.0900)Processing Failure 0110No such attribute 0105Invalid attribute value 0106Duplicate SOP Instance 0111No such SOP Instance 0112No such SOP Class 0118Class Instance conflict 0119Missing attribute 0120Missing attribute value 0121Resource limitation 0213Success MPPS Instance created 00004.2.8.3.2 Activity - MPPS Update4.2.8.3.2.1 Description and Sequencing of ActivityWith the MPPS UI the status of the MPPS Instance can be set to “COMPLETED” or“DISCONTINUED”. During performance of the procedure the status will remain “IN PROGRESS”.4.2.8.3.2.2 Proposed Presentation ContextFor "MPPS Update" the same Presentation Contexts as with “Patient registered” are proposed.Please see related table in section 4.2.8.3.1.2.4.2.8.3.2.3 SOP Specific Conformance• Attributes for the Performed procedure Step N-SETThe Siemens Artis zee/zeego DICOM Modality Performed Procedure Step SCU informs theremote SCP about the performed examination and its status. The N-SET message is sent aftereach acquisition (status "IN PROGRESS") and per finished examination (finished status“COMPLETED” or incomplete status “DISCONTINUED”). The following table describes thesupported attributes of a N-SET message.Table 48 - Performed Procedure Step N-SET AttributesAttribute Name Tag Type ValuePerformed Procedure Step InformationPerformed Procedure Step Status (0040,0252) 3"IN PROGRESS" during procedure,“COMPLETED” or “DISCONTINUED”for final N-SETPerformed Procedure Step Description (0040,0254) 3 from SPS Description or user inputProcedure Code Sequence (0008,1032) 3 from Requested Procedure>Code Value (0008,0100) 1C>Coding Scheme Designator (0008,0102) 1C>Coding Scheme Version (0008,0103) 3>Code Meaning (0008,0104) 3© Siemens AG, Healthcare Sector 2009 Rev. 08 Page 55 of 105