User Manual - Koukaam.se

VIVOTEKAn event is an action initiated by a user-defined trigger source; it is the causal arrangement of thefollowing three elements: Trigger, Event Schedule, and Action.TriggerThis is the cause or stimulus which defines when to trigger the Network Camera. The trigger source canbe configured to use the Network Camera’s built-in motion detection mechanism or external digital inputdevices.There are several choices of trigger sources as shown below. Select the items to display the detailedconfiguration options.■ Video motion detectionThis option makes use of the built-in motion detection mechanism as a trigger source. To enable thisfunction, you need to configure a Motion Detection Window first. For more information, please refer toMotion detection on page 49 for details.■ PeriodicallyThis option allows the Network Camera to trigger periodically for every other defined minute. Up to 999minutes are allowed.■ Digital inputThis option allows the Network Camera to use an external digital input device or sensor as a triggersource. Depending on your application, there are many choices of digital input devices on the marketwhich helps to detect changes in temperature, vibration, sound and light, etc.■ System bootThis option triggers the Network Camera when the power to the Network Camera is disconnected.■ Recording notifyThis option allows the Network Camera to trigger when the recording disk is full or when recordingstarts to rewrite older data. If you want receive Recording notify message, please refer to page 67for detailed information.58 - User's Manual