User Manual - Koukaam.se

VIVOTEKfor event/control transferjoystick 0/7 Indicate whether to support the joystickcontrolGroup: event_iPARAMETER VALUE SECURITYDESCRIPTION(get/set)name string[40] 6/6 The identification of this entryenable 0, 1 6/6 To enable or disable this event.priority 0, 1, 2 6/6 Indicate the priority of this event.“0” indicates low priority.“1” indicates normal priority.“2” indicates high priority.delay 1~999 6/6 Delay seconds before detect next event.triggerboot,di,motion,seq,recnotify,tampering6/6 Indicate the trigger condition.“boot” indicates system boot.“di” indicates digital input.“motion” indicates video motion detection.“seq” indicates periodic condition.“visignal” indicates video input signal loss“recnotify” indicates space for recording media is full“tampering” indicates camera tampering detecteddi 6/6 Indicate which di detected.This field is required when trigger condition is “di”.One bit represents one digital input. The LSB indicatesDI 0.mdwin 6/6 Indicate which motion detection windows detected.This field is required when trigger condition is “md”.One bit represents one window.The LSB indicates the 1 st window.For example, to detect the 1 st and 3 rd windows, setmdwin as 5.User's Manual - 99