User Manual - Koukaam.se

VIVOTEKSource: Select the recording source (stream 1 or stream 2).Recording Schedule: Specify the recording duration.■ Select the days of the week.■ Select the recording start and end times in 24-hr time format.Destination: You can select the network storage to store the recorded video files.Capacity: You can choose either the “entire free space available” or “limit the recording size”. Therecording size limit must be larger than the reserved amount for cyclic recording.File name prefix: Enter the text that will be appended to the front of the file name.Enable cyclic recording: If you check this item, when the maximum capacity is reached, the oldest filewill be overwritten by the latest one. The reserved amount is reserved for cyclic recording to preventmalfunction. This value must be larger than 15 MBytes.If you want to enable recording notification, please click Application to set up. Please refer to Trigger >Recording notify on page 58 for detailed information.When completed, select Enable this recording. Click Save to enable the setting and click Close to exitthis page. When the system begins recording, it will send the recorded files to the Network Storage.The new recording name will appear in the drop-down list on the recording page as shown below.To remove a recording setting from the list, select a recording name from the drop-down list and clickDelete.■ Click Video (Name): Opens the Recording Settings page to modify.■ Click ON (Status): The Status will become OFF and stop recording.■ Click NAS (Destination): Opens the file list of recordings as shown below. For more information aboutfolder naming rule, please refer to page 67 for details.200811202008112120081122User's Manual - 71