Samsung SRN-470D User Manual - Use-IP

overviewREMOTE CONTROLSEARCHDisplays the search menu.MODEChanges the screen mode.POWERDisplays the Exit pop up screen.BACKUPDisplays the Backup Menu.OPEN/CLOSEOpens or closes the CD tray.DVR/NVRActivates the NVR function.NUMBER [0~+10]Used as the numeric input keys, or displays a singlechannel.Skip Backward (by unit time), Slow Rewind,Slow Forward, Skip Forward (by unit time)T/WZooms in or out.MENUGoes to the menu screen.IDSets the ID of the system.Select 2 digits from 0 ~ 9 while pressing the ID Key.Move FrameWhile paused, moves to the previous/next frame.FR, STOP, PLAY/PAUSE, FFPTZDisplays or ends PTZ.SCROLL ,.Moves the menu scroll.RETURNReturns to the previous screen.Up/Down/Left/Right(▲▼◄►)/ENTERMoves the cursor up/down/left/right, and runs the SelectMenu.FREEZEFreezes the screen temporarily.ZOOMRuns the digital zoom (x2) function.RECStarts or ends the live recording.VIEWRuns the View function in the PTZ mode.AUDIOTurns Audio on/off.ALARMCancels the Alarm.REC LOCKSelects the recording lock function.PRESETDisplays the Preset Setup.Using the numeric buttonsCHANNEL 10CHANNEL 11–16Press the [+10] button first, then press the 0 button again within 3 seconds.Press the [+10] button first, then press any number between 1 to 6 within 3 seconds.Changing the Remote Control ID1. Press the [ID] button of the remote control and check the ID displayed on the NVR screen.The factory default ID of the remote control is 00.2. Enter 2 digits of your selection in order, while pressing the system [ID] button.3. When ID input is done, press the system [ID] button again to check the setting.M12_ overview` If you want to change the remote control ID to 08: Press and hold the system [ID] button and press the numbers [0] and [8]in sequence.Remote control's ID and NVR's ID should be matched for proper operation. Refer to "Remote Devices". (Page 58)