Samsung SRN-470D User Manual - Use-IP
Samsung SRN-470D User Manual - Use-IP
Samsung SRN-470D User Manual - Use-IP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Menu Setup• Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarmoutput port.• Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specifiedalarm output port.• Duration : Sets the alarm duration for the alarm signal and beep sound.- Check Alarm, Replace Alarm signals will output through the selected alarm out ports (1, 2, 3, and 4).` <strong>SRN</strong>-<strong>470D</strong> supports only alarms : and .- If was selected, a beep will sound.- If was selected, both beep sound and alarm signal through rear side ports will output.M` status means that the HDD is operating but it has problems that require technical examination.( ) appears on the Live screen.` status means that the HDD has defect and requires immediate replacement.( ) appears on the Live screen.Remote DevicesYou can specify the ID of a remote control that will operate in sync with NVR.[MENU] ▼ ►▼ [ENTER] ▲▼◄► [ENTER]• Remote Control : Specify the use of the remote control.• ID : Select an ID number to synchronize with the remote control.If it does not match with the remote control ID, the remote control will not operate at all.M` For changing the remote control's ID, refer to "Changing the Remote Control ID". (Page 12)58_ Menu Setup