Samsung SRN-470D User Manual - Use-IP

liveChannel SettingYou can display the channel in a desired area of a split screen.1. Place the cursor over the camera name of each channel to display the key to the right on the screen.2. Click a camera name to display a channel list where you can select a different channel.3. Select a desired channel and click it.The current channel will be switched to the selected one.Use the cursor to select a channel to move, and drag and drop it to a desired channel; this can also changethe channel position.` Ex : if switching CH 1 to CH 7CH1CH5CH9CH2CH6CH10CH3CH7CH11CH4CH8CH12CH7CH5CH9CH2CH6CH10CH3CH1CH11CH4CH8CH12CH13CH14CH15CH16CH13CH14CH15CH16Switching to Single ModeWhen in split mode, select and double-click a desired channel to switch to its Single mode.Press the number corresponding to a desired channel on the remote control to switch to its Single mode.Refer to "Remote Control > Using the numeric buttons". (Page 12)` Ex : If double-clicking CH 3 or pressing the number "3" on the remote control.CH1CH5CH9CH2CH6CH10CH3CH7CH11CH4CH8CH12CH13CH14CH15CH16CH334_ live