Samsung SRN-470D User Manual - Use-IP

4. Provide the and for the selected network camera.5. Press to register the selected camera.To manually search for and register a network camera● MENU SETUP1. Press in the bottom left corner of the "Add Camera Automatically" window.2. The Manual Search window appears.3. Select a protocol.The input items may differ depending on the selected protocol..• SAMSUNG : Comply with the internal network protocols adopted by Samsung Techwin.• RTSP : Comply with RFC 2326, one of "Real Time Streaming Protocol (RTSP)" for real-time streaming.4. If you select the protocol, check options as necessary.• Model : Select a camera model.- SVNP : Indicate a network camera that complies with SVNP protocols of Samsung Techwin. If you want toconnect a camera that is not displayed in the camera list, select a SVNP model name.` However, you must select the correct model name of the camera, if it's in the list. Some of obsolete camera models may not besupported.• Address type: Select an address type of the camera.- Static : Used to provide the IP address of the camera manually.- iPOLiS DDNS : This is available only if the camera is registered with the iPOLiS DDNS(www.samsungipolis.com) server. Provide the registered domain for DDNS ID.` Ex) http://www.samsungipolis.com/snb5000 -> provide "snb5000" for iPOLiS DDNS- MAC (Samsung) : Available if the camera supports the MAC Address-based DDNS.- URL : Used for URL address input.M` Refer to the user manual of the connected camera and check the DDNS specification that is supported by the camera.• IP : Provide the IP address of the camera.• Device Port : Provide the device port of the camera.• HTTP Port : Provide the HTTP port of the camera.• ID : Provide the ID of the camera that you want to register.English _53