Samsung SRN-470D User Manual - Use-IP

Menu Setup5. If you select for the protocol, check options as necessary.• RTSP URL : For more information about the RTSP address, refer to the manual of each applicable networkcamera.• ID : Enter the ID with which you connect to RTSP.• Password : Enter the password for connecting to RTSP protocols.• Mode : Select a mode that is supported by the network camera in RTSP connection mode.- TCP : The connection type with the network camera will switch to "RTP over TCP".- UDP : The connection type with the network camera will switch to "RTP over UDP".- HTTP : The connection type with the network camera will switch to "RTP over TCP (HTTP)".M` For RTSP connection, up to 5 cameras of 2M or 3M resolution can be supported.If you want to check the error details of camera registrationIf you failed to register a camera, the reason for the failure will be displayed.• Connection failed due to unknown error. : This message appears if the camera has failed to be registereddue to unknown connection status.• Connected successfully. : This message appears if the camera is connected successfully.• Incorrect model information. Provide the correct model information. : This message appears if themodel information provided for registering the camera is incorrect.• Authentication has failed : This message appears if the ID or password provided for registering the camerais incorrect.• Connection has failed due to excessive concurrent users. : This message appears if the concurrent usercount exceeds the upper limit.• Connection has failed due to incorrect HTTP port information. : This message appears if the HTTP portnumber of the camera is invalid.• Connection has failed. Unknown connection status. : This message appears if the camera has failed tobe connected due to a unknown error.• Custom Model : If you set the camera model to when registering it, the system will retrieve thename directly from the camera. However, if registration has failed, you can enter the camera name manually.54_ Menu Setup