SIM300D AT Command Set - Distributed Systems and Networking

More documents

Recommendations

Info

SIM300D AT Command Set Confidential SIMCOM iconId>,]] Reference Note 6.2.11 Refresh string format: using either SMS default alphabet or UCS2 alpha field coding to inform user of current transaction. SIM300D_AT_V1.00 Page 116 of 180 ‘0’ : Special case indicating SIM provided a null alphaId and the user should not be informed of the current transaction. If alphaId field is not present it is up to the ME to decide whether or not to inform the user. Numeric tag for the icon to be displayed – corresponds to the index in the Image file on the SIM. 0 No icon 1..255 Icon tag integer: denotes use of associated icon Command data for Refresh proactive command Result Code +STUD: 01,[,< numFiles>,] Reference Note Parameters 0 display icon only (replaces any text string or alphaId) 1 display with alphaId or text string 01 hex notation: Command Type value. See Section 6.2 for values. hex notation: command Qualifier information giving the type of Refresh to be performed. 00 SIM Initialisation and Full File Change Notification 01 File Change Notification 02 SIM Initialisation and File Change Notification 03 SIM Initialisation 04 SIM Reset integer: gives number of Files in the list string type, hex notation: gives the full paths for the SIM files, each file being delimited by commas within the string For values ’01’ and ‘02’ file list data must be provided by the SIM. For all other values any included file list information will be ignored. If the optional parameter is not present in the result code, we assume that s ’01’and ‘02’ cannot occur.
SIM300D AT Command Set Confidential SIMCOM 6.3 ME Initialisation Procedure On powering up the ME the SIM’s Phase file (EF 0x6FAE) is read. If this indicates the SIM is of Phase 2+ or greater the ME sends a Terminal Profile command (see [3]) to the SIM to inform it of the SIM Application Toolkit capabilities of the ME. The SIM then limits its instruction set based on this profile. This terminal profile data is configurable and resides in an application layer configuration file for ease of customisation. On sending the Profile Download command The SIM will respond with signals that will provide the ME with information on whether the SIM has a SIM Toolkit application present. If on completing ME initialisation the stack determines that the SIM has no STK capability an unsolicited result code +STC: 0 will be issued to indicate to the user that there is no SIM toolkit availability during the current session. However, if STK information is available for use by the ME/application then the lower layers of the SIMCom Protocol Stack are informed and the first proactive command to be sent from the SIM to the user will be the Set Up Menu command to allow the available STK menu to be added to the ME’s own menu structure (i.e. unsolicited result code +STC: 25 will be issued by the CI Task after it has received this proactive command from the SIMAT task. 6.4 Definition of AT Commands This section details the AT commands for driving an STK application on the SIM. 6.4.1 AT+STGC SIM Toolkit Get Command parameters Get proactive Command parameters Write Command +STGC= Parameter Reference +STGC: , hex notation: Command Type value See Section 6.2 for values. proactive command specific data, dependent on The information varies between proactive SIM commands, according to the type of command issued by the SIM, as given by . This reflects the useful part of the proactive command from a user’s perspective. The result codes returned to the application on a command by command basis are outlined in the following subsections: 6.4.1.1 Display Text Command data for Display Text proactive command Result Code +STGC: 21,,, Parameters 21 hex notation: Command Type value. See Section 6.2 for values. SIM300D_AT_V1.00 Page 117 of 180
Page 1 and 2:
SIM300D AT Command Set SOFTWARE SPE
Page 3 and 4:
SIM300D AT Command Set Confidential
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66: SIM300D AT Command Set Confidential
Page 115: SIM300D AT Command Set Confidential
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
show all

SIM300D AT Command Set - Distributed Systems and Networking

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?