SIM300D AT Command Set - Distributed Systems and Networking

More documents

Recommendations

Info

SIM300D AT Command Set Confidential SIMCOM AT+CSCS=[] Reference GSM 07.07 [13] Sets which character set are used by the TE. The TA can then convert character strings correctly between the TE and ME character sets. Parameter see Test command Note 3.2.14 AT+CSTA Select Type of Address AT+CSTA Select Type of Address Test command AT+CSTA=? Read command AT+CSTA? Reference GSM 07.07 [13] Response +CSTA: (128,129,145, 161,177) Response +CSTA: OK Parameters < type > Current address type setting. Note 3.2.15 AT+CHLD Call hold and multiparty AT+CHLD Call hold and multiparty Test Command AT+CHLD=? Write Command AT+CHLD=[ ] Response SIM300D_AT_V1.00 Page 44 of 180 The ATD command overrides this setting when a number is dialed. 129 Unknown type(IDSN format number) 128 Unknown type(unknown number format) 161 National number type(IDSN format) 145 International number type(ISDN format ) 177 Network specific number(ISDN format) +CHLD: list of supported s OK Response TA controls the supplementary services Call Hold, Multiparty and Explicit Call Transfer. Calls can be put on hold, recovered, released, added to conversation, and transferred. Note These supplementary services are only applicable to tele service 11 (Speech: Telephony). OK If error is related to ME functionality: +CME ERROR:
SIM300D AT Command Set Confidential SIMCOM Reference Parameters 0 Terminate all held calls or UDUB (User Determined User Busy) for a waiting call 1 Terminate all active calls (if any) and accept the other call (waiting call or held call) 1X Terminate the specific call number X (X= 1-7)( active, waiting or held) 2 Place all active calls on hold (if any) and accept the other call (waiting call or held call) as the active call 2X Place all active calls except call X (X= 1-7) on hold 3 Add the held call to the active calls 3.2.16 AT+CIMI Request international mobile subscriber identity AT+CIMI Request international mobile subscriber identity Test command AT+CIMI=? Execution command AT+CIMI Reference GSM 07.07 [13] Response OK Parameters Response TA returns for identifying the individual SIM which is attached to ME. +CIMI: OK If error is related to ME functionality: +CME ERROR: Parameter International Mobile Subscriber Identity (string without double quotes) 3.2.17 AT+CKPD Keypad Control AT+CKPD Keypad Control Test command AT+ CKPD=? Execution command Response OK Parameters Response AT+CKPD= string . *0.1 seconds is the time to stroke each key and [,[, *0.1 seconds is the length of pause between two strokes. ]] Keystrokes are emulated. SIM300D_AT_V1.00 Page 45 of 180
Page 1 and 2: SIM300D AT Command Set SOFTWARE SPE
Page 3 and 4: SIM300D AT Command Set Confidential
Page 43: SIM300D AT Command Set Confidential
Page 95 and 96:
SIM300D AT Command Set Confidential
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
show all

SIM300D AT Command Set - Distributed Systems and Networking

Create successful ePaper yourself

Delete template?

Save as template?