SIM300D AT Command Set - Distributed Systems and Networking

SIM300D AT Command Set
Confidential SIMCOM
10.6 SIM Toolkit Commands
Demonstration Syntax Expect Result
Inform voyager that the accessory AT+STPD=5,1F7FFF7 OK
Has SAT97 capability and sets the output
to TEXT mode.
F7F
+STC: 25
AT+CMGF=1 OK
+STC: 81
Sets the response timer AT+START=200 OK
10.7 Audio Commands
Demonstration Syntax Expect Result
DTMF tones AT+CLDTMF=2,”1,2, DTMF tones generated in the
3,4,5”
headset
10.8 SMS commands
Demonstration Syntax Expect Result
Set SMS system into text mode, as AT+CMGF=1
opposed to PDU mode.
OK
Send an SMS to myself.
AT+CMGS=”+861391
818xxxx”
+CMGS:34
>This is a test OK
Unsolicited notification of the SMS
arriving
+CMTI:”SM”,1
Read SMS message that has just arrived. AT+CMGR=1 +CMGR: “REC UNREAD”,
Note: the number should be the same as
“+8613918186089”, ,”02
that given in the +CMTI notification.
/01/30,20:40:31+00”
This is a test
OK
Reading the message again changes the AT+CMGR=1 +CMGR: “REC READ”,
status to “READ” from ”UNREAD”
“+8613918186089”,
“02/01/30,20:40:31+00”
This is a test
OK
,
Send another SMS to myself. AT+CMGS=”+861391
818xxxx”
+CMGS:35
>Test again
OK
Unsolicited notification of the SMS
arriving
+CMTI:”SM”,2
Listing all SMS messages.
AT+CMGL=”ALL” +CMGL: 1,”REC
Note:”ALL” must be in uppercase.
READ”,”+8613918186089”,
, “02/01/30,20:40:31+00”
This is a test
+CMGL: 2,”REC
UNREAD”,” ”,”+861391818
SIM300D_AT_V1.00 Page 179 of 180