SIM300D AT Command Set - Distributed Systems and Networking

More documents

Recommendations

Info

SIM300D AT Command Set Confidential SIMCOM 8.2.14 AT+CIPATS Set auto sending timer AT+CIPATS Set auto sending timer Test command +CIPATS=? Read command +CIPATS? Set command +CIPATS=, Reference Response +CIPATS: (list of supported s) OK Parameter See set command Response +CIPATS: Parameter See set command Response OK ERROR Parameter a numeric parameter which indicates whether set timer when sending data SIM300D_AT_V1.00 Page 160 of 180 0 not set timer when sending data 1 Set timer when sending data a numeric parameter which indicates the seconds after Note which the data will be sent 8.2.15 AT+CIPSPRT Set prompt of ‘>’ when sending data AT+CIPSPRT Set prompt of ‘>’ when sending data Test command +CIPSPRT=? Read command +CIPSPRT? Set command +CIPSPRT= Response +CIPSPRT: () Parameter See set command Response +CIPSPRT: Parameter See set command Response OK ERROR Parameter a numeric parameter which indicates whether echo prompt ‘>’ after issuing AT+CIPSEND command 0 no prompt and show “send ok” when send successfully 1 echo ‘>’ prompt and show “send ok” when send successfully 2 no prompt and not show “send ok” when send successfully
SIM300D AT Command Set Confidential SIMCOM Reference Note 8.2.16 AT+CIPSERVER Configure as a server AT+CIPSERVER Configure as a server Read command +CIPSERVER? Execution command +CIPSERVER Reference Response OK Parameter 0 has not been configured as a server 1 has been configured as a server Response OK ERROR If configuration as server success, return: SERVER OK If configuration as server fail, return: STATE: CONNECT FAIL Parameter refer to AT+CIPSTART Note 8.2.17 AT+CIPCSGP Set CSD or GPRS connection mode AT+CIPCSGP Set CSD or GPRS for connection mode Test command +CIPCSGP=? Read command +CIPCSGP? Set command +CIPCSGP=,[(, , ), Response +CIPCSGP: (list of supported connection s),[(GPRS parameters ,,),(CSD parameters ,,,)] OK Parameter See set command Response +CIPCSGP: OK Parameter See set command Response OK ERROR Parameter a numeric parameter which indicates the wireless connection SIM300D_AT_V1.00 Page 161 of 180
Page 1 and 2:
SIM300D AT Command Set SOFTWARE SPE
Page 3 and 4:
SIM300D AT Command Set Confidential
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110: SIM300D AT Command Set Confidential
Page 159: SIM300D AT Command Set Confidential
show all

SIM300D AT Command Set - Distributed Systems and Networking

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?