SIM300D AT Command Set - Distributed Systems and Networking
SIM300D AT Command Set - Distributed Systems and Networking
SIM300D AT Command Set - Distributed Systems and Networking
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SIM300D</strong> <strong>AT</strong> <strong>Comm<strong>and</strong></strong> <strong>Set</strong><br />
Confidential SIMCOM<br />
<strong>Set</strong> comm<strong>and</strong><br />
+CIPCCFG=,<br />
,,<br />
Execution <strong>Comm<strong>and</strong></strong><br />
+CIPCCFG<br />
Reference<br />
See set comm<strong>and</strong><br />
Response<br />
OK<br />
ERROR<br />
Parameter<br />
number of retries to be made for an IP packet.<br />
number of 200ms intervals to wait for serial input<br />
before sending the packet.<br />
size in bytes of data block to be received from serial<br />
port before sending.<br />
whether turn on the escape sequence, default is<br />
Response<br />
ERROR<br />
Note<br />
TRUE.<br />
9 Supported unsolicited result codes<br />
9.1 Summary of CME ERROR Codes<br />
Final result code +CME ERROR: indicates an error related to mobile equipment or network.<br />
The operation is similar to ERROR result code. None of the following comm<strong>and</strong>s in the same<br />
comm<strong>and</strong> line is executed. Neither ERROR nor OK result code shall be returned.<br />
values used by common messaging comm<strong>and</strong>s:<br />
Code of Meaning<br />
0 phone failure<br />
1 no connection to phone<br />
2 phone-adaptor link reserved<br />
3 operation not allowed<br />
4 operation not supported<br />
5 PH-SIM PIN required<br />
6 PH-FSIM PIN required<br />
7 PH-FSIM PUK required<br />
10 SIM not inserted<br />
11 SIM PIN required<br />
12 SIM PUK required<br />
13 SIM failure<br />
<strong>SIM300D</strong>_<strong>AT</strong>_V1.00 Page 167 of 180
Change language