SIM300D AT Command Set - Distributed Systems and Networking
SIM300D AT Command Set - Distributed Systems and Networking
SIM300D AT Command Set - Distributed Systems and Networking
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SIM300D</strong> <strong>AT</strong> <strong>Comm<strong>and</strong></strong> <strong>Set</strong><br />
Confidential SIMCOM<br />
Reference<br />
Unsolicited result code<br />
When the presentation of the CLI at the TE is enabled (<strong>and</strong> calling<br />
subscriber allows), an unsolicited result code is returned after every RING<br />
(or +CRING: ) at a mobile terminating call.<br />
+CLIP: , ,<br />
Parameter<br />
string type phone number of calling address in format<br />
specified by <br />
<strong>SIM300D</strong>_<strong>AT</strong>_V1.00 Page 50 of 180<br />
type of address octet in integer format;<br />
129 Unknown type(IDSN format number)<br />
128 Unknown type(unknown number format)<br />
161 National number type(IDSN format)<br />
145 International number type(ISDN format )<br />
177 Network specific number(ISDN format)<br />
string type alphanumeric representation of <br />
3.2.21 <strong>AT</strong>+CLIR Calling Line Identification Restriction<br />
<strong>AT</strong>+CLIR Calling Line Identification Restriction<br />
Read <strong>Comm<strong>and</strong></strong><br />
<strong>AT</strong>+CLIR?<br />
Test <strong>Comm<strong>and</strong></strong><br />
<strong>AT</strong>+CLIR=?<br />
Write <strong>Comm<strong>and</strong></strong><br />
<strong>AT</strong>+CLIR=<br />
Response<br />
+CLIR: , <br />
OK<br />
corresponding to the entry found in phone book<br />
If error is related to ME functionality:<br />
+CME ERROR: <br />
Parameters<br />
see write comm<strong>and</strong><br />
Response<br />
+CLIR: (list of supported s)<br />
OK<br />
Response<br />
TA restricts or enables the presentation of the CLI to the called party when<br />
originating a call.<br />
The comm<strong>and</strong> overrides the CLIR subscription (default is restricted or<br />
allowed) when temporary mode is provisioned as a default adjustment for<br />
all following outgoing calls. This adjustment can be revoked by using the<br />
opposite comm<strong>and</strong>.<br />
OK
Change language