SIM300D AT Command Set - Distributed Systems and Networking
SIM300D AT Command Set - Distributed Systems and Networking
SIM300D AT Command Set - Distributed Systems and Networking
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SIM300D</strong> <strong>AT</strong> <strong>Comm<strong>and</strong></strong> <strong>Set</strong><br />
Confidential SIMCOM<br />
Reference<br />
GSM 07.05<br />
Response<br />
TA transmits SMS <strong>Comm<strong>and</strong></strong> message from a TE to the network<br />
(SMS-COMMAND). Message reference value is returned to the TE<br />
on successful message delivery. Value can be used to identify message upon<br />
unsolicited delivery status report result code.<br />
1) If text mode(+CMGF=1) <strong>and</strong> sending successful:<br />
+CMGC: <br />
OK<br />
2) If PDU mode(+CMGF=0) <strong>and</strong> sending successful:<br />
+CMGC: <br />
OK<br />
3)If error is related to ME functionality:<br />
+CMS ERROR: <br />
Parameters<br />
GSM 03.40 TP-Message-Reference in integer format<br />
4.2.9 <strong>AT</strong>+CNMI New SMS message indications<br />
<strong>AT</strong>+CNMI New SMS message indications<br />
Test <strong>Comm<strong>and</strong></strong><br />
<strong>AT</strong>+CNMI=?<br />
Read <strong>Comm<strong>and</strong></strong><br />
<strong>AT</strong>+CNMI?<br />
Write <strong>Comm<strong>and</strong></strong><br />
<strong>AT</strong>+CNMI=[[,[,<br />
[,[,]]]]]<br />
Response<br />
+CNMI: (list of supported s),(list of supported s),(list of<br />
supported s),(list of supported s),(list of supported s)<br />
OK<br />
Parameters<br />
see write comm<strong>and</strong><br />
Response<br />
+CNMI: ,,,,<br />
OK<br />
Parameters<br />
see write comm<strong>and</strong><br />
Response<br />
TA selects the procedure for how the receiving of new messages from the<br />
network is indicated to the TE when TE is active, e.g. DTR signal is ON. If<br />
TE is inactive (e.g. DTR signal is OFF), message receiving should be done<br />
as specified in GSM 03.38.<br />
OK<br />
If error is related to ME functionality:<br />
+CMS ERROR: <br />
<strong>SIM300D</strong>_<strong>AT</strong>_V1.00 Page 89 of 180