SIM300D AT Command Set - Distributed Systems and Networking

More documents

Recommendations

Info

SIM300D AT Command Set Confidential SIMCOM 628 GPRS - peer refuses our MRU 629 GPRS - peer requested CHAP 630 GPRS - profile (cid) not defined 631 GPRS - unspecified protocol error 632 GPRS - QOS not accepted 633 GPRS - QOS validation fail 634 GPRS - reactivation required 635 GPRS - regular deactivation 636 GPRS - semantic error in TFT operation 637 GPRS - semantic errors in packet filter 638 GPRS - semantically incorrect message 639 GPRS - service type not yet available 640 GPRS - syntactical error in TFT operation 641 GPRS - syntactical errors in packet filter 642 PRS - too many RXJs 643 GPRS - unknown PDP address or type 644 GPRS - unknown PDP context 645 GPRS - user authorization failed 646 GPRS - QOS invalid parameter 673 audio manager not ready 674 audio format cannot be configured 705 SIM toolkit menu has not been configured 706 SIM toolkit already in use 707 SIM toolkit not enabled 737 +CSCS type not supported 738 CSCS type not found 741 must include with 742 incorrect format 743 length too long 744 SIM full 745 unable to change PLMN list 746 network operator not recognized 749 invalid command length 750 invalid input string 753 missing required cmd parameter 754 invalid SIM command 755 invalid File Id 756 missing required P1/2/3 parameter 757 invalid P1/2/3 parameter 758 missing required command data 759 invalid characters in command data 765 invalid input value 766 unsupported value or mode 767 operation failed SIM300D_AT_V1.00 Page 170 of 180
SIM300D AT Command Set Confidential SIMCOM 768 multiplexer already active 769 unable to get control of required module 770 SIM invalid - network reject 771 call setup in progress 772 SIM powered down 773 SIM File not present 9.2 Summary of CMS ERROR Codes Final result code +CMS ERROR: indicates an error related to mobile equipment or network. The operation is similar to ERROR result code. None of the following commands in the same command line is executed. Neither ERROR nor OK result code shall be returned. values used by common messaging commands: Code of Meaning 300 ME failure 301 SMS ME reserved 302 operation not allowed 303 operation not supported 304 invalid PDU mode 305 invalid text mode 310 SIM not inserted 311 SIM pin necessary 312 PH SIM pin necessary 313 SIM failure 314 SIM busy 315 SIM wrong 316 SIM PUK required 317 SIM PIN2 required 318 SIM PUK2 required 320 memory failure 321 invalid memory index 322 memory full 330 SMSC address unknown 331 no network 332 network timeout 500 unknown 512 SIM not ready 513 unread records on SIM 514 CB error unknown 515 PS busy 517 SM BL not ready 528 Invalid (non-hex) chars in PDU SIM300D_AT_V1.00 Page 171 of 180
Page 1 and 2:
SIM300D AT Command Set SOFTWARE SPE
Page 3 and 4:
SIM300D AT Command Set Confidential
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120: SIM300D AT Command Set Confidential
Page 169: SIM300D AT Command Set Confidential
show all

SIM300D AT Command Set - Distributed Systems and Networking

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?