SIM300D AT Command Set - Distributed Systems and Networking

More documents

Recommendations

Info

SIM300D AT Command Set Confidential SIMCOM Parameters 0 Buffer unsolicited result codes in the TA. If TA result SIM300D_AT_V1.00 Page 90 of 180 code buffer is full, indications can be buffered in some other place or the oldest indications may be discarded and replaced with the new received indications. 1 Discard indication and reject new received message unsolicited result codes when TA-TE link is reserved (e.g. in on-line data mode). Otherwise forward them directly to the TE. 2 Buffer unsolicited result codes in the TA when TA-TE link is reserved (e.g. in on-line data mode) and flush them to the TE after reservation. Otherwise forward them directly to the TE. 3 Forward unsolicited result codes directly to the TE. TA-TE link specific inband technique used to embed result codes and data when TA is in on-line data mode. (the rules for storing received SMs depend on its data coding scheme (refer GSM 03.38 [2]), preferred memory storage (+CPMS) setting and this value): 0 No SMS-DELIVER indications are routed to the TE. 1 If SMS-DELIVER is stored into ME/TA, indication of the memory location is routed to the TE using unsolicited result code: +CMTI: , 2 SMS-DELIVERs (except class 2) are routed directly to the TE using unsolicited result code: +CMT: [], (PDU mode enabled) or +CMT: , [], [,,,,,,,] (text mode enabled; about parameters in italics, refer command Show Text Mode Parameters +CSDH). Class 2 messages result in indication as defined in =1. 3 Class 3 SMS-DELIVERs are routed directly to TE using unsolicited result codes defined in =2. Messages of other classes result in indication as defined in =1. (the rules for storing received CBMs depend on its data coding scheme (refer GSM 03.38 [2]), the setting of Select CBM Types (+CSCB) and this value): 0 No CBM indications are routed to the TE. 2 New CBMs are routed directly to the TE using unsolicited result code: +CBM: (PDU mode enabled) or
SIM300D AT Command Set Confidential SIMCOM Reference GSM 07.05 0 +CBM: ,,,, (text mode enabled). No SMS-STATUS-REPORTs are routed to the TE. SIM300D_AT_V1.00 Page 91 of 180 1 SMS-STATUS-REPORTs are routed to the TE using unsolicited result code: +CDS: (PDU mode enabled) or +CDS: ,,[],[],,, (text mode enabled) 0 TA buffer of unsolicited result codes defined within Unsolicited result code this command is flushed to the TE when 1...3 is entered (OK response shall be given before flushing the codes). 1 TA buffer of unsolicited result codes defined within this command is cleared when 1...3 is entered. +CMTI: , Indication that new message has been received +CMT: , Short message is output directly +CBM: Cell broadcast message is output 4.2.10 AT+CPMS Preferred SMS Message Storage AT+CPMS Preferred SMS Message Storage Read Command AT+CPMS? Test Command AT+CPMS=? Response directly +CPMS:,,,,,,, , OK If error is related to ME functionality: +CMS ERROR Parameters see write command Response +CPMS: (list of supported s),(list of supported s) ,(list of supported s) Parameters see write command
Page 1 and 2:
SIM300D AT Command Set SOFTWARE SPE
Page 3 and 4:
SIM300D AT Command Set Confidential
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40: SIM300D AT Command Set Confidential
Page 89: SIM300D AT Command Set Confidential
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
show all

SIM300D AT Command Set - Distributed Systems and Networking

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?