SIM300D AT Command Set - Distributed Systems and Networking

More documents

Recommendations

Info

SIM300D AT Command Set Confidential SIMCOM 529 Incorrect PDU length 530 Invalid MTI 531 Invalid (non-hex) chars in address 532 Invalid address (no digits read) 533 Incorrect PDU length (UDL) 534 Incorrect SCA length 536 Invalid First Octet (should be 2 or 34) 537 Invalid Command Type 538 SRR bit not set 539 SRR bit set 540 Invalid User Data Header IE 10AT Commands Sample 10.1 Profile Commands Demonstration Syntax Expect Result The AT command interpreter is actively responding to input. Display product identification information: the manufacturer, the product name and the product revision information. Display current configuration, a list of the current active profile parameters. Reporting of mobile equipment errors. The default CME error reporting setting is disabled. Switching to verbose mode displays a string explaining the error in more details. Storing the current configuration in nonvolatile memory. When the board is reset, configuration changes from the last session are loaded. Set the ME to minimum functionality SIM300D_AT_V1.00 Page 172 of 180 AT OK ATI SIMCOM_Ltd SIMCOM_SIM300D Revision: 1008B02SIM300D_ATMEL AT&V [A complete listing of the AT+CMEE=? AT+CMEE? AT+CSCS=? AT+CSCS=”TEST” AT+CMEE=2 AT+CSCS=”TEST” ATE0;&W AT [Reset the board] AT ATE1;&W AT active profile] +CMEE:(0,1,2) +CMEE:0 +CSCS:”GSM” +CSCS:”UCS2” ERROR OK +CME ERROR: +CSCS type not found OK [No echo] OK AT+CFUN=0 OK [No echo] [Echo on]
SIM300D AT Command Set Confidential SIMCOM ME has entered full functionality mode. AT+CFUN? +CFUN:1 10.2 SIM Commands Demonstration Syntax Expect Result Listing available phonebooks, and AT+CPBS=? +CPBS:(“DC”,”FD”, selecting the SIM phone book. ”LD”,”ON”,”SM”,”MC”) AT+CPBS=”SM” OK Displaying the ranges of phone book AT+CPBR=? entries and listing the contents of the +CPBR:(1-150),41,14 phone book. AT+CPBR=1,10 [a listing of phone book contents] Wrinting an entry to the current AT+CPBW=,”13918 OK phonebook. 18xxxx”, ,”Daniel” Finding an entry in the current phonebook using a text search. Deleting an entry from the current phonebook specified by its position index. 10.3 General Commands AT+CPBR=1,10 [a listing of phone book contents] AT+CPBF=”Daniel” +CPBF: 5,”139181860 89”,129,”Daniel” AT+CPBW=2,” ” OK AT+CPBR=1,10 [a listing of phone book contents] Demonstration Syntax Expect Result Displays the current network operator AT+COPS? +COPS: 0,0,”CHINA that the handset is currently registered with. MOBILE” Display a full list of network operator AT+COPN AT+COPN names. +COPN:”20201”, “COSMO” [skip a bit] +COPN:”730100”, “ENTEL PCS” OK Power down the phone – reducing its AT+CFUN=0 OK functionality. This will deregister the [wait for deregister] handset from the network. ATD6241xxxx; NO CARRIER AT+CFUN=1 OK CFUN disables access to the SIM. AT+CSMINS=1 OK CSMINS shows when the SIM is AT+CFUN=0 OK available again. +CSMINS:0 AT+CFUN=1 OK +CSMINS:1 Emulating the MIMI keypad to make a AT+CKPD=”6241xx SIM300D_AT_V1.00 Page 173 of 180 OK
Page 1 and 2:
SIM300D AT Command Set SOFTWARE SPE
Page 3 and 4:
SIM300D AT Command Set Confidential
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122: SIM300D AT Command Set Confidential
Page 171: SIM300D AT Command Set Confidential
show all

SIM300D AT Command Set - Distributed Systems and Networking

Create successful ePaper yourself

Delete template?

Save as template?