SIM300D AT Command Set - Distributed Systems and Networking

More documents

Recommendations

Info

SIM300D AT Command Set Confidential SIMCOM Reference a string parameter which indicates the IP address of the primary domain name server a string parameter which indicates the IP address of the secondary domain name server Note 8.2.11 AT+CDNSGIP Query the IP address of given domain name AT+CDNSGIP Query the IP address of given domain name Test command +CDNSGIP=? Read command +CDNSGIP? Set command +CDNSGIP= Reference Response +CDNSGIP: DOMAIN NAME LENGTH(0,100) OK Response +CDNSGIP: ("DOMAIN NAME") ok Response OK ERROR If successful, return: If fail, return: ERROR: STATE: Parameter a string parameter which indicates the domain name a string parameter which indicates the IP address SIM300D_AT_V1.00 Page 158 of 180 corresponding to the domain name a numeric parameter which indicates the error code 1 DNS not Authorization 2 invalid parameter 3 network error 4 no server 5 time out 6 no configuration 7 no memory refer to AT+CIPSTART Note 8.2.12 AT+CDNSORIP Connect with IP address or domain name server AT+CDNSORIP Connect with IP address or domain name server Test command +CDNSORIP=? Response +CDNSORIP: (list of supported s)
SIM300D AT Command Set Confidential SIMCOM Read command +CDNSORIP? Set command +CDNSORIP= Reference OK Parameter See set command Response +CDNSORIP: OK Parameter See set command Response OK ERROR Parameter a numeric parameter which indicates whether connecting with IP address server or domain name server 0 remote server is an IP address 1 remote server is a domain name Note 8.2.13 AT+CIPHEAD Add an IP head when receiving data AT+CIPHEAD Add an IP head when receiving data Test command +CIPHEAD=? Read command +CIPHEAD? Set command +CIPHEAD= Reference Response +CIPHEAD: (list of supported s) Parameter See set command Response +CIPHEAD: Parameter See set command Response OK ERROR Parameter a numeric parameter which indicates whether adding an IP header to received data or not 0 not add IP header 1 add IP header, the format is “+IPD(data length):” Note SIM300D_AT_V1.00 Page 159 of 180
Page 1 and 2:
SIM300D AT Command Set SOFTWARE SPE
Page 3 and 4:
SIM300D AT Command Set Confidential
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108: SIM300D AT Command Set Confidential
Page 157: SIM300D AT Command Set Confidential
show all

SIM300D AT Command Set - Distributed Systems and Networking

Create successful ePaper yourself

Delete template?

Save as template?