SIM300D AT Command Set - Distributed Systems and Networking

More documents

Recommendations

Info

SIM300D AT Command Set Confidential SIMCOM Set command +CSTT=,< user id>, Execution Command +CSTT Reference Parameter See set command Response OK ERROR Parameter a string parameter which indicates the GPRS access point name a string parameter which indicates the GPRS user name a string parameter which indicates the GPRS password Response OK ERROR Note 8.2.7 AT+CIICR Bring up wireless connection with GPRS or CSD AT+CIICR Bring up wireless connection with GPRS or CSD Test command +CIICR=? Execution command +CIICR Reference Response OK Response OK STATE: ERROR Parameter referred to AT+CIPSTART Note 8.2.8 AT+CIFSR Get local IP address AT+CIFSR Get local IP address Test command +CIFSR=? Read command +CIFSR? AT+CIICR only activate moving scene at the status of IP START,after operate this command, the state changed to IP CONFIG. If module accept the activate operation, the state changed to IP IND; after module accept the activate operation, if activate successfully, the state changed to IP GPRSACT, response OK, otherwise response ERROR. Response +CIFSR: OK Response +CIFSR: OK Execution command Response SIM300D_AT_V1.00 Page 156 of 180
SIM300D AT Command Set Confidential SIMCOM +CIFSR Reference OK ERROR Parameter a string parameter which indicates the IP address assigned Note from GPRS or CSD Only at the status of activated the moving scene: IP GPRSACT、 TCP/UDP CONNECTING、CONNECT OK、IP CLOSE can get local IP Address by AT+CIFSR, otherwise response ERROR. 8.2.9 AT+CIPSTATUS Query current connection status AT+CIPSTATUS Query current connection status Test command +CIPSTATUS=? Read command +CIPSTATUS? Execution command +CIPSTATUS Reference Response +CIPSTATUS: OK Response +CIPSTATUS: OK Response STATE: OK Parameter referred to AT+CIPSTART Note 8.2.10 AT+CDNSCFG Configure domain name server AT+CDNSCFG Configure domain name server Test command +CDNSCFG=? Read command +CDNSCFG? Set command +CDNSCFG=, Response +CDNSCFG: ("(0,255).(0,255).(0,255).(0,255)"),("(0,255).(0,255).(0,255).(0,255)") OK Response +CDNSCFG: ("PRIMARY DNS"),("SECONDARY DNS") Response OK ERROR Parameter SIM300D_AT_V1.00 Page 157 of 180
Page 1 and 2:
SIM300D AT Command Set SOFTWARE SPE
Page 3 and 4:
SIM300D AT Command Set Confidential
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106: SIM300D AT Command Set Confidential
Page 155: SIM300D AT Command Set Confidential
show all

SIM300D AT Command Set - Distributed Systems and Networking

Create successful ePaper yourself

Delete template?

Save as template?