SIM300D AT Command Set - Distributed Systems and Networking

More documents

Recommendations

Info

SIM300D AT Command Set Confidential SIMCOM Execution command AT+CLCK = , [, [,]] Response This command is used to lock, unlock or interrogate a ME or a network facility . Password is normally needed to do such actions. When querying the status of a network service (=2) the response line for ‘not active’ case (=0) should be returned only if service is not active for any . If 2 and command is successful OK If =2 and command is successful +CLCK: [,[ +CLCK: , class2....]] OK Parameter "PS" PH-SIM (lock Phone to SIM card) (ME asks password SIM300D_AT_V1.00 Page 48 of 180 when other than current SIM card inserted; ME may remember certain amount of previously used cards thus not requiring password when they are inserted) "SC" SIM (lock SIM card) (SIM asks password in ME power-up and when this lock command issued) "AO" BAOC (Barr All Outgoing Calls) (refer GSM02.88[6] clause 1) "OI" BOIC (Barr Outgoing International Calls) (refer GSM02.88[6] clause 1) "OX" BOIC-exHC (Barr Outgoing International Calls except to Home Country) (refer GSM02.88[6] clause 1) "AI" BAIC (Barr All Incoming Calls) (refer GSM02.88[6] clause 2) 0 unlock "IR" BIC-Roam (Barr Incoming Calls when Roaming outside the home country) (refer GSM02.88 [6] clause 2) "AB" All Barring services (refer GSM02.30[19]) (applicable only for =0) "AG" All out Going barring services (refer GSM02.30[19]) (applicable only for =0) "AC" All in Coming barring services (refer GSM02.30[19]) (applicable only for =0) "PN" Network Personalization (refer GSM 02.22[33]) "PU" network subset Personalization (refer GSM 02.22[33]) "PP" service Provider Personalization (refer GSM 02.22[33]) "PC" Corporate Personalization (refer GSM 02.22[33]) 1 lock 2 query status password 1 voice 2 data
SIM300D AT Command Set Confidential SIMCOM Reference GSM 07.07 [14] 4 fax 7 all classes (default) 0 off 1 on Note 3.2.20 AT+CLIP calling line identification presentation AT+CLIP Calling line identification presentation Read Command AT+CLIP? Test Command AT+CLIP=? Write Command AT+CLIP= Response +CLIP: , OK If error is related to ME functionality: +CME ERROR: Parameters see write command Response +CLIP: (list of supported s) OK Parameters see write command Response TA enables or disables the presentation of the CLI at the TE. It has no effect on the execution of the supplementary service CLIP in the network. OK If error is related to ME functionality: +CME ERROR: Parameters 0 suppress unsolicited result codes 1 display unsolicited result codes 0 CLIP not provisioned 1 CLIP provisioned 2 unknown SIM300D_AT_V1.00 Page 49 of 180
Page 1 and 2: SIM300D AT Command Set SOFTWARE SPE
Page 3 and 4: SIM300D AT Command Set Confidential
Page 47: SIM300D AT Command Set Confidential
Page 99 and 100:
SIM300D AT Command Set Confidential
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
show all

SIM300D AT Command Set - Distributed Systems and Networking

Create successful ePaper yourself

Delete template?

Save as template?