SIM300D AT Command Set - Distributed Systems and Networking

More documents

Recommendations

Info

SIM300D AT Command Set Confidential SIMCOM Reference V.25ter Parameter Note � No effect in GSM 2.2.16 ATQ Set result code presentation mode ATQ Set result code presentation mode Set command ATQ[] Reference V.25ter Response This parameter setting determines whether or not the TA transmits any result code to the TE. Information text transmitted in response is not affected by this setting. OK (none) Parameter If =0: If =1: 0 TA transmits result code Note SIM300D_AT_V1.00 Page 20 of 180 1 Result codes are suppressed and not transmitted 2.2.17 ATS0 set number of rings before automatically answering the call ATS0 Set number of rings before automatically answering the call Read command ATS0? Set command ATS0=[] Reference V.25ter Response OK Response This parameter setting determines the number of rings before auto-answer. OK Parameter 0 automatic answering is disable Note 1-255 enable automatic answering on the ring number specified � If is set too high, the calling party may hang up before the call can be answered automatically. 2.2.18 ATS3 Set command line termination character ATS3 Set command line termination character Read command ATS3? Response OK
SIM300D AT Command Set Confidential SIMCOM Set command ATS3=[] Reference V.25ter Response This parameter setting determines the character recognized by TA to terminate an incoming command line. The TA also returns this character in output. OK Parameter 0-13-127 command line termination character Note � Default 13 = CR. 2.2.19 ATS4 Set response formatting character ATS4 Set response formatting character Read command ATS4? Set command ATS4=[] Reference V.25ter Response OK Response This parameter setting determines the character generated by the TA for result code and information text. OK Parameter 0-10-127 response formatting character Note � Default 10 = LF. 2.2.20 ATS5 Set command line editing character ATS5 Set command line editing character Read command ATS5? Set command ATS5=[] Reference V.25ter Response OK Response This parameter setting determines the character recognized by TA as a request to delete from the command line the immediately preceding character. OK Parameter 0-8-127 response formatting character Note � Default 8 = Backspace. SIM300D_AT_V1.00 Page 21 of 180
Page 1 and 2: SIM300D AT Command Set SOFTWARE SPE
Page 3 and 4: SIM300D AT Command Set Confidential
Page 19: SIM300D AT Command Set Confidential
Page 71 and 72:
SIM300D AT Command Set Confidential
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
show all

SIM300D AT Command Set - Distributed Systems and Networking

Create successful ePaper yourself

Delete template?

Save as template?