SIM300D AT Command Set - Distributed Systems and Networking

More documents

Recommendations

Info

SIM300D AT Command Set Confidential SIMCOM Execution command AT+CPBW= [, , [, []]] Reference GSM 07.07 [13] Response TA writes phone book entry in location number in the current phone book memory storage selected with +CPBS. Entry fields written are phone number (in the format ) and text associated with the number. If those fields are omitted, phone book entry is deleted. If is left out, but is given, entry is written to the first free location in the phone book. OK Parameter max. length of phone number max. length of text for number location number phone number type of number; SIM300D_AT_V1.00 Page 58 of 180 129 Unknown type(IDSN format number) 128 Unknown type(unknown number format) 161 National number type(IDSN format) 145 International number type(ISDN format ) 177 Network specific number(ISDN format) text for phone number in current TE character set specified by +CSCS. Note: The following characters in must be entered via the Note 3.2.30 AT+CPIN Enter PIN AT+CPIN Enter PIN Test command AT+CPIN=? Response OK Parameter escape sequence: see execution command GSM char. Seq. Seq.(hex) Note \ \5C 5C 35 43 (backslash) “ \22 5C 32 32 (string delimiter) BSP \08 5C 30 38 (backspace) NULL \00 5C 30 30 (GSM null) ‘0’ (GSM null) may cause problems for application layer software when reading string lengths.
SIM300D AT Command Set Confidential SIMCOM Execution command AT+CPIN? Set command AT+CPIN= [, ] Reference GSM 07.07 [13] Response TA returns an alphanumeric string indicating whether some password is required or not. +CPIN: OK Parameter READY no further entry needed SIM PIN ME is waiting for SIM PIN SIM PUK ME is waiting for SIM PUK PH_SIM PIN ME is waiting for phone to SIM card (antitheft) PH_SIM PUK ME is waiting for SIM PUK (antitheft) SIM PIN2 PIN2, e.g. for editing the FDN book possible only if preceding command was acknowledged with +CME ERROR:17 SIM PUK2 possible only if preceding command was acknowledged with error +CME ERROR: 18. Response TA stores a password which is necessary before it can be operated (SIM PIN, SIM PUK, PH-SIM PIN, etc.). If the PIN is to be entered twice, the TA shall automatically repeat the PIN. If no PIN request is pending, no action is taken and an error message, +CME ERROR, is returned to TE. If the PIN required is SIM PUK or SIM PUK2, the second pin is required. This second pin, , is used to replace the old pin in the SIM. OK Parameter string type; password string type; If the PIN required is SIM PUK or SIMPUK2: new password Note 3.2.31 AT+CPWD Change password AT+CPWD Change password Test command AT+CPWD=? Response TA returns a list of pairs which present the available facilities and the maximum length of their password. +CPWD: list of supported (, )s OK Parameter otherwise see execution command, without "FD" integer max. length of password SIM300D_AT_V1.00 Page 59 of 180
Page 1 and 2:
SIM300D AT Command Set SOFTWARE SPE
Page 3 and 4:
SIM300D AT Command Set Confidential
Page 5 and 6:
Page 7 and 8: SIM300D AT Command Set Confidential
Page 57: SIM300D AT Command Set Confidential
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
show all

SIM300D AT Command Set - Distributed Systems and Networking

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?