MOPEX User's Guide - IRSA

PURPOSE
MOPEX User’s Guide
This module works together with three other modules, Detect, Mosaic Dual Outlier and
Level, to perform Dual Outlier rejection using both temporal and spatial filtering methods
(see §8.2.3). The detection maps produced by the Detect module are in the original pixel
frame. This module will project the detection maps on to a common reference frame using the
Fiducial Image Frame table, FIF.tbl.
INPUT
This module does not have any user input parameters.
COMMAND LINE INPUT
Despite not having any input parameters, the following parameter block must be included in
the namelist:
&MOSAICPROJIN
&END
OUTPUT
Interp Detection Map Table (interp_detmap_ImageList.txt): a list of the projected
detection maps, their sizes, and their offsets in the x- and y-directions with respect to the FIF.
Interp Detection Map Images (proj_*detmap.fits): The FITS stack of projected, distortioncorrected,
and interpolated detection maps.
The output files from this module are written to the DualOutlier-mosaic/ directory.
DISCUSSION
The module projects the Dual Outlier detection maps onto the common reference frame of the
FIF. It uses the same image interpolation concepts utilized by the Mosaic Interpolate module
(see §8.4 and §5.6.8).
Mosaicking (mosaic.pl) 69
Mosaic Modules