Matest catalogue 2018

124
SECTION B | ASPHALT
MULTI-FUNCTION TESTING FRAMES, ALSO SUITABLE FOR MARSHALL TESTS
S213-05N
CBR/MARSHALL 3 SPEEDS FRAME 50 KN NEW
The frame is provided of three fixed speed ranges, easily selectable
with a frequency changer (inverter) activated by an electric switch:
1.00 mm/min for CBR tests (as Australian and old BS Standards)
1.27 mm/min. for CBR tests
50.8 mm/min for Marshall tests.
Supplied without load ring and accessories which have to be
ordered separately.
Technical detail: see p. 494
S212N
UNIVERSAL MULTISPEED LOAD FRAME 50KN
This motorized machine with electronic digital touch-screen
controlled by microprocessor, is suitable to perform all the tests
when the requested speed rate is within:
0.05 to 63 mm/min with max. load of 50 kN
It can therefore perform:
- Marshall test with rate of 50.8 mm/min.
- Splitting tensile test on Marshall specimens.
- Unconfined, CBR tests.
Supplied without load ring and accessories which have to be
ordered separately.
Power supply: 230V 1ph 50-60Hz 750W
Technical Specifications: see p. 494
NEW
B046-03
S213-05N + MARSHALL accessories
ACCESSORIES for S212N and S213-05N frames
MARSHALL test, Ø 4":
S212-05 Load piston
B046N Stability mould Ø 4" (101.6 mm) aluminium made
As alternative:
B046-03 Stability mould Ø 4" (101.6 mm), steel made
to ASTM D6927
NEW
B047 Flow meter
B047-01 Dial gauge for flow meter
S370-08S Load ring 30kN with electric stop safety device
S374 Brake device to hold max. load
S212N
MARSHALL test Ø 6"
STANDARD: ASTM D5581
S212-05 Load piston
B046-02 Stability mould Ø 6"
B047 Flow meter
B047-01 Dial gauge for flow meter
S370-10S Load ring 50 kN with electric
stop safety device
S374 Brake device to hold
max. load
B046-02
Note: The frames S212N and S213-05N are suitable also for
tensile splitting tests (EN 12697-23, ASTM D6931,
AASHTO T283) by using the specific devices described
on p. 123