Matest catalogue 2018

212
SECTION B | PAVEMENT TECHNOLOGY
STS-25 - Ordering info
Sigla Testing Kit/Jig/Accessories Relevant standard(s) With temperature controlled cabinet Accessories
DC(T) B284-01 ASTM D7313-07a "(10°C greater than the low B290-07 needed
temperature PG of the asphalt binder) or
B225-02H or B225-02V
B290-12 + C090-18 needed
or
B225-03H or B225-03V
SCB B254-02-KIT AASHTO TP124 (25°c) B254-16 needed
(B208+B254-10+B254-02) ASTM D8044 B225-01+ optional B225-04 B290-02 (1or 2) optional
or B254-11
B225-02V
(according to B290-02 q.ty) optional
or
B254-12 optional
B225-03V
SCB B254-02-KIT AASHTO TP105-13 (22°C greater than the low B254-16 needed
(B208+B254-10+B254-02) temperature PG of the asphalt binder) 2 x B253-53 needed
B225-02V
B254-13 needed
or
2 x B254-14 needed
B225-03V
2 x B254-15 needed
2 x B290-05 or 2 x B290-06 needed
B290-07 or B290-16 + C090-18 needed
OT B204-14 ASTM WK26816 (25°c) 3 x B204-02 needed
B225-01+ optional B225-04 B204-03 needed
or
B290-02OT needed
B225-02H
or
B225-03H
OT B204-14 Tex 248F (25°c) 3 x B204-02 needed
B225-01+ optional B225-04 B204-13 needed
or
B290-02OT needed
B225-02H
or
B225-03H
DTT B225-10 AASHTO T314-12 (+6° to -40 °C) none
B225-03H
TSRST B282-01-KIT AASHTO TP10 (-50°C to +10°C, capable of cooling 2 x B290-09 needed
(3 x B282-01+2 x B282-02 at a rate of 10°C per hour) B282-08 needed
+1 x B282-21+1 x B282-09 B225-03V B201-52 optional
+2 x B282-04+2 x B282-05
+2 x B282-06+B282-07)