Matest catalogue 2018

SECTION C | CONCRETE
303
C096N SPECIFIC APPLICATIONS
C090-15
DEFLECTION MEASUREMENT DEVICE
STANDARDS: EN 14488-3 | ASTM C1609, C1018
This device is fixed directly on the fiber reinforced concrete beam under test.
The device is placed between the loading bearers of a flexure frame or of a flexure device in a compression frame.
The test is performed by applying a flexural load to the concrete beam with load and displacement control and with automatic deflection measurement
of the loaded specimen.
It is possible to test fibre reinforced concrete beams 100x100x400 or 500 mm and 150x150x500 or 600 mm dimensions.
The deflection device is steel made with chromed finishing; it is supplied complete with transducer holders, vertically positioned on the two
opposite sides of the beam, but without the two transducers, for the measurement of deflection (mod. S336-11), and without the fork form
transducer (mod. C090-16) to be ordered separately.
Dimensions: 300x450x300 mm
Weight: 8 kg approx.
C090-15
Bending device for testing
to ASTM C1609
S336-11
DISPLACEMENT TRANSDUCER, HIGH PRECISION
STANDARDS: EN 14488-3 | ASTM C1609, C1018
To be attached to the device C090-15 for the measurement of
deflection and determination of toughness on fibre reinforced concrete
beams. Travel: 10 mm
Complete with cable and connector.
Two transducers are required.
C090-16
FORK FORM TRANSDUCER
STANDARDS: EN 11039-2, EN 14651
For the measurement of the Crack Mouth Opening Displacement
(CMOD) and the Crack Base, Medium and Tip Opening Displacement
(CTOD). Measuring range: 5 mm
Complete with cable and connector.
C109-15N
FIRMWARE/SOFTWARE for:
- Measurement of deflection on fibre reinforced concrete beams.
- Determination of toughness, first crack strength and ductility.
- Energy absorption test on sprayed specimens. (see p. 283)
STANDARD: EN 14488-5
C090-18
C090-16
C109-14N
FIRMWARE/SOFTWARE for flexural stengths (first peak,
ultimate and residual) EN 14488-3 (see p. 18).
EN 14651 Clip gauge device
C090-18
DATUM BLOCK, to be glued on the lower side of the concrete
beam for the first crack strength test (CMOD). Pack of 24 pieces.
C090-18 C090-20
C090-20
DATUM BLOCK, square, to be glued on the concrete beam
surface for the deflection measurement on the two opposite sides
(CTOD). Pack of 24 pieces.