Matest catalogue 2018

SECTION B | ASPHALT
131
SPECIFIC APPLICATIONS:
DURIEZ TEST SET
STANDARD: NF P98 - 251-1, NF P98 - 251-4
Used to determine the mechanical and phisical properties of
bituminous mixtures. To perform the test, the specimens have to be
temperature conditioned using a suitable climatic chamber
(see mod. C313, p. 348)
S206N Unitronic 200 KN
S206-21N Software for Duriez test
Duriez test set for 120 mm diameter specimens:
B095-01 Testing mould
B095-02 Penetration piston
B095-03* Penetration piston grooved
B095-04 Upper/Lower piston
B095-05* Upper/Lower piston grooved
B095-06 Two temporary supports
B095-07 Demoulding cylindrical container
MARSHALL STABILITY TEST
STANDARDS: EN 12697-34 | ASTM D6927, D5581, D1559
AASHTO T245 | BS 598:107 | NF P98-251-2
S206N Unitronic 200 kN
S337-34 Strain gauge load cell 50 kN capacity
S206-31 Flange/connector of the load cell S337-34
S212-05 Loading piston
B046N Stability mould Ø 4" aluminium made
As alternative:
B046-03 Stability mould Ø 4" steel made. ASTM D6927
B046-02 Stability mould Ø 6" steel made. ASTM D5581
B043-01N Software for Marshall test
NEW
NEW
Duriez test set for 80 mm diameter specimens:
B096-01 Testing mould
B096-02 Penetration piston
B096-03* Penetration piston grooved
B096-04 Upper/Lower piston
B096-05* Upper/Lower piston grooved
B096-06 Two temporary supports
B096-07 Demoulding cylindrical container
* Used for cold mixtures with bituminous emulsions
B095-01...B095-07
DIRECT SHEAR (LEUTNER) BETWEEN
BITUMINOUS STRATA
STANDARD: ALP A StB T.80
Direct shear test (LEUTNER) on the connection between bituminous
strata, carried out on asphalt cylinder specimens Ø 150 mm or
100 mm obtained from road cores or on laboratory made specimens.
S206N Unitronic 200 kN
S337-34 Strain gauge load cell 50 kN capacity
S206-31 Flange/connector of the load cell S337-34
S212-05 Loading piston
B047-10 LEUTNER testing head for specimens Ø 150 mm
B047-11 Spacers for Ø 100 mm specimens with Leutner head
B043-03N Software for Leutner and Marshall tests.
B046-03
B046-02 + B047 + B047-01
B046N
SPLITTING TENSILE TEST
STANDARDS: EN 12697-23 | ASTM D6931 | AASHTO T283 | CNR 134
S206N Unitronic 200 kN
S337-34 Strain gauge load cell 50 kN capacity
S206-31 Flange/connector of the load cell S337-34
S212-05 Loading piston
B047-02 Splitting tensile device for samples Ø 4” and 6” (p. 121)
B047-04 Set of TWO displacement transducers
with accessories (p. 123)
B043-02N Software for Splitting Tensile test (p. 18)
S337-34
S212-05
B047-02 + B047-04
B047-10 + B047-11
Additional specific accessories for tests on:
Concrete and Mortar (compression, flexure, punching etc.) - Soils (CBR) - Steels (Tensile), are listed in soil section, p. 508.