Matest catalogue 2018

88
SECTION B | ASPHALT
BULK DENSITY OF ASPHALT SPECIMENS
HYDROSTATIC GRAVITY METHOD
STANDARDS: EN 12697-6, EN 12390-7
ASTM D1186, D2726, C127 | AASHTO T166, T85
V085
SPECIFIC GRAVITY FRAME
Used for specific gravity determination of materials, and specifically
the bulk density of laboratory compacted asphalt specimens and
asphalt road cores.
Technical details: see section “V” p. 582
BITUMINOUS MIXTURES TEMPERATURE
MEASUREMENT
STANDARD: EN 12697-13
V154
DIGITAL MICROPROCESSOR THERMOMETER
Range : -50 + 950 °C, resol. 0.1 – 1 °C
Supplied without probes to be ordered separately
(see accessories).
Technical details and other models: see section “V” p. 590
V075-11
V154-01
V041
V154
ACCESSORIES
V154-01 PENETRATION PROBE, 120 mm long
V154-02 SURFACE PROBE, 260 mm long
ACCESSORIES
V085
V041
DENSITY BASKET, stainless steel, Ø 200 mm by 200 mm high,
3.35 mm mesh.
V075-11
DIGITAL BALANCE 6000 g capacity x 0.1g sens.
Technical details and other models: see section “V” p. 581
A106
WAX MELTING POT
Technical details:
see section “A” p. 28
BINDER DRAINAGE, BASKET METHOD
To determine the drainage of bituminous samples obtained from
different mixtures of mineral fine aggregates or additives, for the
evaluation of the drainage results.
STANDARD: EN 12697-18
B022-20
DRAINAGE BASKET
Dimensions 100x100x100 mm, made from stainless steel sheet
with Ø 3.15 mm holes.
Weight: 500 g approx.
B022-21
Tray, stainless steel made, dimensions 160x160x10 mm.
Weight: 500 g aprox.
V300-19
PARAFFIN WAX, pack of 5000 g
V175-02
DIGITAL VERNIER CALIPER
0-200 mm x 0.001 mm
A106
B022-20
B022-21