Matest catalogue 2018

SECTION S | SOIL
479
SPECIFIC GRAVITY OF SOILS
E136
WATER BATH, DIGITAL
STANDARD: BS 1377:2
For the determination of particle density, pyknometer method,
according to BS 1377:2 Specifications, and for general laboratory
purposes.
All stainless steel made, with wool insulation and water circulation
electric stirrer, the bath ensures an uniform and constant temperature.
Complete with digital thermostat and dual safety thermostat with
higher thermic threshold ensuring safe working conditions.
A cooling device to be connected to the water net is used when
room temperature exceeds the requested one.
Capacity: 40 litres
Temperature range: ambient to 60 °C, accuracy ± 0.5 °C
DESICCATORS BOROSILICATE GLASS
Complete with perforated porcelain plate.
Without vacuum
With vacuum
A035 Ø 200 mm A039 Ø 200 mm
A036 Ø 250 mm A040 Ø 250 mm
A036-01 Ø 300 mm A040-01 Ø 300 mm
ACCESSORY
V300-15 DESICCATORS SALTS Silica gel box 1000 g
Internal dimensions: 510x350x230 mm
Overall dimensions: 680x420x420 mm
Power supply: 230V 1ph 50Hz 1200W
Weight: 28 kg approx.
A039
A035
V202
ASPIRATOR PUMP
To be connected to the water net with a minimum
pressure of 0.7 kg/cmq, it produces a moderate
vacuum pressure.
Weight: 100 g
SPECIFIC GRAVITY BOTTLE, GAY LUSSAC TYPE
STANDARDS: BS 1377:2 | ASTM D854 | AASHTO T100
NF P18-054, NF P94-054
Pyrex glass made, complete with capillary tube stopper, these
bottles are used to determine the specific gravity and density of fine
soils and filler in fine aggregates.
Models Capacity
V108 25 ml
V108-01 50 ml
V108-02 100 ml
V108-03 250 ml
E136
S147
CONE PYKNOMETER
STANDARDS: EN 1097-6 | BS 1377:2
Used for the determination of specific
gravity and water absorption of sands
and fine aggregates.
Glass jar with aluminium cone and
rubber seal.
Capacity: 1 kg
S148
SAND ABSORPTION CONE
AND TAMPER
STANDARDS: EN 1097-6 | BS 812
Used to determine the specific gravity
and water absorption of fine aggregates.
Weight: 500 g approx.
S147
V202
V108-01
V108-02
S148