Matest catalogue 2018

514
SECTION S | SOIL
PLATE BEARING TEST
STANDARDS: ASTM D1194, D1195, D1196 | BS 1377:9 | CNR N° 92 and 146 | UNE 7391 | Comparable to DIN 18134
This test is performed for the determination of the bearing capacity of a soil in-situ on road constructions, foundations, road subgrades, airport
and highway pavements.
A wide range of plate bearing test equipment is available, together with many accessories according to the different Standards and specific
end-user needs.
The hand pumps 100 kN and 200 kN capacity are “Enerpac Made” and all models have double speed, ensuring fast approach.
AVAILABLE MODELS
S222 KIT
PLATE BEARING TEST EQUIPMENT
100 KN CAPACITY - 1 DIAL GAUGE MODEL
ANALOGUE MEASURING SYSTEM WITH DIAL MANOMETER
STANDARD: CNR N° 146, method “A”
Consisting of:
S222-01 Hydraulic jack 100 kN capacity, complete with hand
pump, rubber pipe with fast connector, set of extension
rods of different lengths, carrying case.
S222-02 Analogue pressure gauge 0-100 kN, div. 0.5 kN
S226-05 Load plate Ø 300 mm
S226-12 Device for centre dial gauge measure, with spherical
seat.
S222-03 Datum bar assembly, 2.5 m long, telescopic, aluminium
made, adjustable in height, complete with base
supports, plumb and spirit level. Packed separayely.
S377 Dial gauge 25x0.01 mm
S226-16 Articulated dial gauge support with adjustment device.
Weight: 60 kg approx.
S222D KIT
PLATE BEARING TEST EQUIPMENT
100KN CAPACITY - 1 DIGITAL GAUGE MODEL
DIGITAL MEASURING SYSTEM WITH DIGITAL MANOMETER
NEW
Same composition of S222KIT except:
S222-02D Digital pressure manometer 0 - 100 kN
with 10N resolution, instead of the analogue gauge
S222-02.
S222-02D | S225-02D
DIGITAL PRESSURE MANOMETER
The applied load is measured by a high precision electric load cell
with digital display, granting accurate readings also at low loads.
- 65.000 divisions
- 10N resolution
- linearity: 0.05%
- hysteresis: 0.03%
- repeatability: 0.02%
- display: LCD with high visibility
- display height: 16 mm
- battery operated, 12 months life
S222-02D | S225-02D
S223-01 | S223-02
S222-02D
S225-02D
S222 KIT
ACCESSORY for S222 KIT and S223 KIT
S223-01 PRESSURE GAUGE, range 0 - 50 kN, div. 0.25 kN with
large dial Ø 200 mm, complete with fast connector,
used for accurate readings at low loads, as for ex.
pre-load of 0.5 kg/cmq.