Matest catalogue 2018

SECTION S | SOIL
569
CYCLIC TRIAXLAB AUTOMATED SYSTEM ORDERING INFO:
HARDWARE - SOFTWARE
B220-04 KIT
DTS9 WITH MANUAL CROSSHEAD
The machine includes:
B220-14
20 kN load frame with manual crosshead
9 kN servo-pneumatic actuator with its LVDT,
50mm stroke, 70 Hz frequency.
Power supply: 90-264V 50-60Hz 1ph 240W
Dimensions: 1262(h)x400(d)x470(w)
Weight: 80 kg load frame
S303
16 Channel Control and Data Acquisition
System (CDAS) and TestLab software.
For technical specifications, see p. 564
B270-12
Air reservoir assembly with membrane dryer.
It requires pressurized air, minimum 7 bar
(not included).
S307
TRIAXIAL CELL MAX Ø 150X300 MM
Technical specifications:
Max specimen mm Ø 150x300
Max cell pressure 2200 kPa
Overall dimensions mm Ø 338x648
Weight 40 kg approx.
Accessories listed at p. 546
Note: Triaxial cell for cyclic tests
max. 100x200 mm available on request.
MEASURE OF AXIAL FORCE
S337-06
SUBMERSIBLE LOAD CELL 10 KN WITH
SIGNAL CONDITIONER
Rated output 2 mV/V nominal
Accuracy 0.1%
Note: For different requirements load
cells capacity and transducers stroke or
submersible load cells, see p. 548
ACCESSORIES FOR TRIAXIAL CELL
S337-23 Loading ram for the submersible
load cell
S307-05 Transducers holder ring
S307-10 Vacuum generator
S307-19 Vacuum adaptor
S307-11 Alignment coupler assembly
S307-12 Spherical exclusion
S307-13 Base pedestal spacer
OPTIONAL ACCESSORIES
BENDER ELEMENTS KIT for the evaluation of
the stiffness of a soil starting from the measurement
of the maximum shear modulus
(Gmax). The Kit includes:
S307-08 Picoscope
S307-07 T-4001 waveforms transformer
S307-01 Universal puck for bender
elements top
S307-02 Universal puck for bender
elements bottom
S307-22 | 32 | 42 | 52
Base pedestal for bender element
Ø 38 | 50 | 70 | 100 mm
S307-23 | 33 | 43 | 53
Top platen for bender element
Ø 38 | 50 | 70 | 100 mm
S307-24 | 34 | 44 | 54
Pair of porous disc
Ø 38 | 50 | 70 | 100 mm
DEAIRED WATER SYSTEM
S355
DE-AIRING TANK 20 LITRES CAPACITY
It produces de-aired water when connected
to the vacuum pump. It is a Perspex tank with
an inlet water valve and an outlet air valve.
Tank capacity: 20 litres.
Dimensions: 320x320x520 mm
Weight: 15 kg approx.
ACCESSORIES
V205
VACUUM PUMP
To produce vacuum up to of 0.1 mbar
(see p. 597)
V205-10 - V205-12
VACUUM REGULATOR
It is supplied with vacuum gauge, control
valve, suction filter and moisture trap.
V230-03
Rubber tube. Suitable for vacuum, 3 m
MEASURE OF PORE PRESSURE
SYSTEM AND VOLUME CHANGE
S349
PRESSUREMATIC PVC FOR AUTOMATIC
PRESSURE AND VOLUME CONTROL
Output pressure: 3500 kPa
Volume capacity: 250 cc
For Technical Specifications, see p. 565
NEEDED ACCESSORIES
S336-53 Pressure transducer 2000 kPa
with signal conditioner.
S336-55 De-airing block for pressure
transducer
S349-10 Solenoid valve
OPTIONAL ACCESSORIES
S342-03 3 ways water distribution panel
S307 with accessories
Bender elements KIT