Matest catalogue 2018

498
SECTION S | SOIL
B044N-SET
CYBER-PLUS 8 EVOLUTION TOUCH-SCREEN
Developed for the implementation and upgrading of any type of
existing machines (even not manufactured by Matest) applicable to:
- Marshall mechanical load frame mod. B042 KIT.
- CBR/Marshall 3 speeds load frame mod. S213-05N.
- CBR loading machine motorized mod. S211 KIT.
Suitable to perform the following tests:
- MARSHALL: EN 12697-34 | ASTM D6927, D5581, D1559,
CNR N. 30 | NF P98-251-2 | BS 598 :107
AASHTO T245
- INDIRECT TENSILE TEST: EN 12697-23, EN 12697-12
ASTM D6931, D4123 | AASHTO T283
- DETERMINATION OF THE WATER SENSIBILITY OF BITUMINOUS
SPECIMENS: EN 12697-12
- CBR TEST: EN 13286-47 | CNR | UNI 10009 | AASHTO T193
ASTM D1883 | BS 1377:4 | NF P94-078.
- UNCONFINED TEST: ASTM D2166
MAIN FEATURES
Acquisition and data processing system up to 8
analogical/digital channels.
Remote control through PC and UTM2 software.
Graphic display 1/4 VGA color Touch-Screen.
Instant display of load and deformation.
Automatic correction of the axis origin and automatic
calculation of all the results.
Safety switch-off at max reached load and/or
deformation.
B044N SET
HARDWARE SPECIFICATIONS
- 8 indipendent channels available for the load cells or potentiometrics
transducers for load, or displacement measurements;
- Stabilized power supply of the analogical channels:
5 Vcc and 3 Vcc;
- Analogue input: ± 20 mV and ± 5 V;
- Nominal resolution: 24 bit;
- Acquisition up to 200 readings for each channel;
- Safety discrete On/off output;
- Graphic display ¼ VGA colour Touch-Screen;
- Time and calendar system.
FIRMWARE SPECIFICATIONS
- Instant visualization of the load measured by an extensometric
cell.
- Instant visualization of the deformation measured by 4 linear
displacement transducers.
- Visualization of the graphic of the test.
- Visualization of date and time.
- Semi-automatic configuration and calibration of all transducers
connected.
- 20 steps lining that can be set by the enduser.
- Automatic correction of the axis origin for CBR/Marshall tests.
- Setting of all the parameters for test: alarms, zero threshold, endtest
percentage, calculation parameters.
- Time/date and language selection (Italian, English, French,
German, Spanish, Polish).
- Unlimited file for each type of test
- Symbols of pushbuttons functions
- Informative messages (planning alarms, load cell and strain transducer
setting, etc.)
- Printing of the results on the incorporated thermal graphic printer
(accessory C127N). Transfer and management via Ethernet of the
filed data or real-time.
Hardware technical details: see p. 18