Matest catalogue 2018

SECTION S | SOIL
519
S224-02 KIT
DIGITAL PLATE BEARING TEST EQUIPMENT 500 KN CAPACITY
3 LINEAR DISPLACEMENT TRANSDUCERS AND CYBER-PLUS DATA ACQUISITION SYSTEM
STANDARDS: CNR N° 146, method “B” | BS 1377:9, and using loading plates (accessory) Ø 450, 600, 760 mm, it meets also:
ASTM D1195, D1196 | CNR N. 92
Consisting of:
S227-02 Hydraulic jack 500 kN capacity, complete with hand pump, spherical seat, rubber pipe with fast connector, set of extension rods of
different lengths, carrying case.
C116-09S Pressure transducer, connected to the pump.
C405-15N Cyber-Plus 8 Evolution “Touch Screen” for data acquisition, visualization, processing and storing, directly connected to PC or printer.
Technical details: see p. 520
S224-21N Software for test data processing
S226-05 Load plate Ø 300 mm
S226-06 Intermediate plate Ø 160 mm
S222-03 Datum bar assembly, 2.5 m long, telescopic, aluminium made, adjustable in height, complete with base supports, plumb and spirit
level. Packed separayely. (Alternative solution: S223-03 “Y” measuring system, Swiss method).
S336-14 n° 3 linear displacement transducers, 50 mm travel.
S336-31 n° 3 Extension cables for transducer, 5 m long.
S226-16 n° 3 articulated transducer supports with adjustment device.
S335-15 n° 3 universal coupling pliers for transducers.
Weight: 110 kg approx.
ACCESSORIES
S226-01 LOADING PLATE Ø 450 mm
S226-02 LOADING PLATE Ø 600 mm
S226-03 LOADING PLATE Ø 760 mm
S226-09 SET OF TELESCOPIC EXTENSION RODS, aluminium
made, to be connected to the datum bar mod. S222-03
(2.5 m long) to obtain a max. adjustable lenght of 5.5 m
as requsted by ASTM, CNR Specifications
S226-01 + S226-02 + S226-03
S223-03
“Y” MEASURING SYSTEM - SWISS METHOD
STANDARD: SNV 70312
Aluminium alloy made, lightweight and very easy to use, it may be
used as alternative solution to the datum bar assembly mod. S222-03.
This system is applicable to the plate bearing equipment with 3 dial
gauge or 3 displacement transducers.
Weight: kg 7 approx.
S226-09 + S222-03
BENKELMAN BEAM APPARATUS
STANDARDS: NF P94-117-1 | NF P98-200/2 | AASHTO:T256
Utilized in conjunction with the plate bearing test equipment, to
determine the static deformation of road pavements EV1 - EV2 and
Westergard. See section “B” Bitumen, mod. B100 p. 166
S223-03 + S226-16
S226-50
OFFICIAL ACCREDIA CALIBRATION CERTIFICATE
(equivalent UKAS, ENAC, DAKKS, SAS, COFRAC etc.) of the applied
load for the Bearing Test Equipment from mod. S222KIT to mod.
S226KIT (p. 514 to 518) and for Field CBR/Unconfined test equipment
mod. S131KIT, S210KIT, S220KIT (see p. 492...508).
The calibration is carried out only at Matest factory.
B100
B102