Matest catalogue 2018

SECTION C | CONCRETE
317
ACCESSORIES AND SPARES TO COMPRESSION TESTING MACHINES
SAFETY GUARDS
Compliant with CE Safety Directive, manufactured of highly resistant
transparent polycarbonate material and complete with hinges and
lock. The guards are both on front and back sides.
C121-51
DOOR STOP SAFETY SWITCH
This door locking electric switch if fixed on the front door of the
compression machine as safety device. It cuts off mains and stops
the machine when the door is open.
This locking switch can be installed only on digital compression
machines equipped with safety guards with hinges and lock.
Improved and
made stronger
C121-51
MODELS
C121
C121 For machines 1300kN and 1500kN
C121-05 For machines 2000kN (mod C051 to C058-05N)
C121-01 For machines with block platens 2000kN (C073 to C078N)
C121-06 For machines high stability 2000kN (C089 to C089-04N)
C121-10 For machines high stability with block platens 2000kN
capacity (mod C089B to C089-22N)
C121-07 For machines 3000kN (mod C066 to C071N) and high
stability 3000kN (mod C089-06 to C089-10N)
C121-08 For machines with block platens 3000kN (mod C079-01 to
C079-06N) and high stability with block platens 3000kN
(C089-15 to C089-19N)
C121-04 For machines 5000kN (mod C086-02 to C086-03N)
C126
BENCH
Used to hold the compression (or flexural) testing frame, to set the
machine at a proper height for its utilization.
Alternative solution to a concrete holding base.
Made from heavy welded steel, it can be moved in the laboratory
both from front or lateral side by a forklift.
When ordering, please specify the model of testing machine the
bench is to be designed.
Weight: 55 kg approx.
C126
GAUGE
Diameter 250 mm foreseen for max. load pointer, zero adjustment
and mirror face. Spare part for compression and flexure machines.
Supplied pre-calibrated.
C118-05
Models Gauge
C118-14 Range 0 - 1300 kN
C118-03 Range 0 - 1500 kN
C118-04 Range 0 - 600 kN for 1300-1500kN machine
C118-05 Range 0 - 2000 kN
C118-06 Range 0 - 600 kN for 2000kN machine
C118-07 Range 0 - 3000 kN
C118-08 Range 0 - 600 kN for 3000kN machine
C118-09 Range 0 - 150 kN for flexure press C090 serie
C118-10 Range 0 - 150 kN for flexure press C091, C093 serie
C118-11 Range 0 - 1500 kN for tensile press H010
C118-12 Range 0 - 300 kN for cement machine
C118-13 Range 0 - 50 kN for cement machine