22.01.2020 Views

Matest catalogue 2018

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SECTION S | SOIL<br />

473<br />

A028<br />

UNIVERSAL CARBIDE METER<br />

STANDARDS: BS 6576 | AASHTO T217 | ASTM D4944<br />

For the rapid and accurate determination of moisture content in soil<br />

sand, gravel, aggregates etc, based on the calcium carbide method.<br />

It is possible to vary the sample weight from 3 to 100 g achieving a<br />

moisture range 50% (3g) - 7.5% (20g) - 1.5% (100g).<br />

The bottle is calibrated and equipped with a surface thermometer.<br />

The glass ampoule containing the calcium carbide is broken when<br />

the bottle is closed and shaken, granting better accuracy to the test.<br />

The instrument comprises the testing bottle with manometer, small<br />

balance, 25 ampoules of reagent, accessories, case.<br />

Dimensions: 520x340x140 mm<br />

Weight: 6 kg approx.<br />

A117 + A116-11 + A116-12 + C279-02<br />

A028<br />

Note: Other carbide meter models: see p. 29<br />

SPARE<br />

A028-11 Carbide Ampoules (pack of 100)<br />

A117<br />

END-OVER-END SHAKER<br />

PARTICLE DENSITY OF SOILS<br />

STANDARD: BS 1377:2<br />

Used to determine the particle density of soils containing up to 10%<br />

of particles retained on a 37.5 mm sieve.<br />

It rotates two gas jars at approx. 50 rpm to satisfy BS Standard.<br />

The shaker is equipped with an original friction device conforming<br />

the unit to CE Safety Directive.<br />

Supplied without gas jars to be ordered separately<br />

Power supply: 230V 50Hz 1ph 150W<br />

Dimensions: 550x430x500 mm<br />

Weight: 20 kg approx.<br />

V023-01<br />

MOISTURE DETERMINATION BALANCE<br />

160 g capacity x 0.001/0.01 g sensitivity with tare up to 10 g.<br />

A028-11<br />

Samples are dried by a infrared lamp with adjustable heat control.<br />

A built-in-timer 0-61 min. switches off the heater at the end of the<br />

drying cycle which is signaled by a bell. Moisture loss percentage<br />

and residual mass are read directly<br />

from the lighted scale.<br />

Power supply: 230V 1ph 50-60Hz<br />

ACCESSORIES<br />

A116-11<br />

A116-12<br />

V023-01<br />

A116-11 GAS JAR to determine the specific gravity of soils.<br />

Complete with glass cover.<br />

Diameter 75 mm by 300 mm height<br />

Weight: 1.3 kg<br />

A116-12 RUBBER BUNG for the gas jar A116-11<br />

C279-02 SEPARATE CONTROL PANEL, complete with ON/OFF<br />

switch, timer, fuse, electric protections.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!